Cumulus Support

Mark I just installed this and SFTP is working fine for me. One small issue is the Battery Low alarm is flashing on the dashboard, no idea why as all my battery sensors show up as good.

Stuart

Ah, could you switch on debug and data logging then perform another start-up and post the log file please. It could be the WH40 code, that is the only thing changed on that front.

Just found out why I get the alarm. I have an older WH40 which does NOT transmit battery data, only the newer ones do this, mine does show some data when I interrogate battery data but it's not valid!

Stuart

Could you send me the data it does send please, as I tried to allow for those early devices.

The raw data is 02000e0026a404 and the battery value is a4 (169 in dec) and signal is 4. Now bear in mind that this is probably similar to real data from a WH40 with one cell of 1.5 volts. I have no idea what a new WH40 sends.

Stuart

Oops A4 is 164

broadstairs wrote: ↑Tue 14 Jun 2022 2:43 pm The raw data is 02000e0026a404 and the battery value is a4 (169 in dec) and signal is 4. Now bear in mind that this is probably similar to real data from a WH40 with one cell of 1.5 volts. I have no idea what a new WH40 sends.

Oh dear! That is another variation.

Really old units do not send any battery data, then some send a dummy 1.6 as tenths, now yours with a dummy 1.69 as hundredths. Anyway I see the problem.

Battery low for WH40 sensor id = 55050 signal = 4 battery = 1.00V (Low)
WS View do not show any battery level for the WH40.
Enclosing MXdiags with debug enabled. PS
SFTP is OK

Could you send me the log file as confirmation please.

mcrossley wrote: ↑Tue 14 Jun 2022 4:24 pm Could you send me the log file as confirmation please.

What log file?
20220614-180544.txt.zip is enclosed inline?

rogerthn wrote: ↑Tue 14 Jun 2022 4:29 pm

mcrossley wrote: ↑Tue 14 Jun 2022 4:24 pm Could you send me the log file as confirmation please.

What log file?
20220614-180544.txt.zip is enclosed inline?

Sorry that message was for Stuart - it doesn't matter now though, I have fixed the issue. The release version of 3.18.0 will incorporate it.

It also looks like I have a fix for the SFTP issues with some sites when running on Mono. If you get a problem, shout and I'll point you to a test version with the fix incorporated.

mcrossley wrote: ↑Tue 14 Jun 2022 4:43 pm Sorry that message was for Stuart - it doesn't matter now though, I have fixed the issue. The release version of 3.18.0 will incorporate it.

OK!
And, I did get mail configuration verified