Page 1 of 1

New User Questions

Posted: Wed 25 May 2022 2:16 am
by doles.hoaxers0t
Hello!

Just got Cumulus MX installed on my Raspberry Pi, connected my Ambient WS-5000. Everything is almost working, but I have a few questions:

- Can I add more tiles to the "dashboard" section
- Dewpoint is showing 0 degrees, how to fix?
- Current the "dashboard" has a tile for "Wind Chill" but don't see an option to change it to "Heat Index"
- I have historical data from Ambientweather.net from my station, can I import that historical data into Cumulus MX

Thanks for your help!!

Re: New User Questions

Posted: Wed 25 May 2022 9:52 am
by mcrossley
doles.hoaxers0t wrote: Wed 25 May 2022 2:16 am Hello!

Just got Cumulus MX installed on my Raspberry Pi, connected my Ambient WS-5000. Everything is almost working, but I have a few questions:
Welcome to the forum!
doles.hoaxers0t wrote: Wed 25 May 2022 2:16 am - Can I add more tiles to the "dashboard" section
No, the admin interface is fixed (not quite true, someone has developed a custom dashboard, but it is something you would have to install yourself)
doles.hoaxers0t wrote: Wed 25 May 2022 2:16 am - Dewpoint is showing 0 degrees, how to fix?
Your station is probably not supplying this value, so go into Settings | Station Settings | Common Options. Then tick the option "Calculate dew point"
doles.hoaxers0t wrote: Wed 25 May 2022 2:16 am - Current the "dashboard" has a tile for "Wind Chill" but don't see an option to change it to "Heat Index"
No, see above. Customisation of the data displayed is normally done on your own web site presentation of the data. The admin interface is really designed for managing CMX and quick views/checks of things.

I do have a "ToDo" item to allow dashboard customisation, but it way down the list!
doles.hoaxers0t wrote: Wed 25 May 2022 2:16 am - I have historical data from Ambientweather.net from my station, can I import that historical data into Cumulus MX
Probably, you will need to read up on the data formats used in the CMX log files (Monthly and Dayfile) in the Wiki, and then see how you can convert the data.
Somebody else on the forum may already have done this, and if you are lucky they will jump in to help.