Cumulus Support

Hello everyone,

I have Davis pro2 plus weather station connected to Meteo-pi logger which in turn is connected to CumulsMX software.
I need your help on how I can receive "Transmitter Battery Status" and "Console Battery Voltage" and show them on CumulusMX version 3.15.3.

Thank you in advance

the CUTags.php processed by CumulusMX should contain both battery and txbattery webtags or i guess you could add the webtags to the end of the websitedata.json file like so:
https://cumuluswiki.org/a/WebsitedataT.json

ConligWX wrote: ↑Sun 01 May 2022 6:07 pm the CUTags.php processed by CumulusMX should contain both battery and txbattery webtags or i guess you could add the webtags to the end of the websitedata.json file like so:

Code: Select all

"pressH":"<#pressH>",
"TpressH":"<#TpressH>"
"battery":"<#battery>"
"txbattery":"<#txbattery>"
}

https://cumuluswiki.org/a/WebsitedataT.json

I was interested in adding this to MX as I had it Cumulus1. I added the battery code to the websitedataT.json and although the websitedata.json file on the server showed the voltages the web pages were blank of all data readings until I removed that code. So is there another step in the process?

ConligWX wrote: ↑Sun 01 May 2022 6:07 pm the CUTags.php processed by CumulusMX should contain both battery and txbattery webtags or i guess you could add the webtags to the end of the websitedata.json file like so:

Code: Select all

"pressH":"<#pressH>",
"TpressH":"<#TpressH>"
"battery":"<#battery>"
"txbattery":"<#txbattery>"
}

https://cumuluswiki.org/a/WebsitedataT.json

The sample code above is missing a couple of commas after "<#TpressH>" and "<#battery>"

Thanks Mark, all sorted now.