Welcome to the Cumulus Support forum.

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Cumulus MX V4 beta test release 4.0.0 (build 4017) - 17 March 2024

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

Receiving Indoor Temp data from a remote VV console

Discussion specific to Davis weather stations
Post Reply
mcspud
Posts: 2
Joined: Mon 19 Jul 2021 11:04 am
Weather Station: Davis Vantage Vue
Operating System: Raspberry Pi

Receiving Indoor Temp data from a remote VV console

Post by mcspud »

Hi all,
I have a Vantage Vue sensor suite connected to a VV Console inside my garage. That console has a Weather Link serial interface too, which is connected to a raspberry Pi running CMX with MQTT sending data to a Home Assistant instance.

I also have a 'remote' VV Console inside the house just as an additional monitoring station. My question is, is it possible to access the 'indoor temp' reading of this console via the weather link interface of the 'main' console? I'd like to be able to monitor the indoor temp of both the garage and the house.

Hopefully someone has figured this out before!
Thanks!
User avatar
mcrossley
Posts: 12689
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2/WLL
Operating System: Bullseye Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Receiving Indoor Temp data from a remote VV console

Post by mcrossley »

That is not going to be possible as your indoor console has no data connection. If you added some sort of network attached logger it may be possible, but not with CMX directly.
mcspud
Posts: 2
Joined: Mon 19 Jul 2021 11:04 am
Weather Station: Davis Vantage Vue
Operating System: Raspberry Pi

Re: Receiving Indoor Temp data from a remote VV console

Post by mcspud »

Thanks for your reply Mark
I thought that because the remote console was connected wirelessly to the main console, that the data traffic would be two-way....
Oh well...
I'll have to think of something else!
Thanks!
Post Reply