Page 1 of 1
No Wind recorded in the log file
Posted: Sun 13 Mar 2022 1:52 pm
by davepaterson
GW1100C with latest MX.
The last recording of wind speed was on the 8th of March at 23:53 (no alterations on my side at that time) and had plenty wind since then.
Ws View, Ecowitt.net and CumulusMX Dashboard (Now) all show wind speeds but no wind is recorded in the log. Wind Gusts are Recording OK
20220313-133031.txt
Re: No Wind recorded in the log file
Posted: Sun 13 Mar 2022 5:31 pm
by davepaterson
My mistake, I think it was something I did as the file I was checking was a mix of EasyWeatherIP and CumulusMX.
The last wind reading from MX was on the 5th at 18:59
Have attached the diag file which is date at the same time
20220219-193102.zip
Re: No Wind recorded in the log file
Posted: Sun 13 Mar 2022 7:07 pm
by mcrossley
I think you will have to switch on data logging and post another file.
I would expect warning messages if wind data was not being received. So I need to see what data is being sent by your device.
Re: No Wind recorded in the log file
Posted: Sun 13 Mar 2022 7:26 pm
by davepaterson
Have switched on data logging and will let it run.
MX is receiving the wind data
Wind.jpg
Taken at 19:24.
Will let it run for an hour and post the data logging file.
Re: No Wind recorded in the log file
Posted: Sun 13 Mar 2022 7:52 pm
by davepaterson
Solved. I had ticked 'Speed for average calc:"
The pic in my last post made me look at the setting
Now working.