Page 1 of 1
I cant get the gauges to work
Posted: Fri 18 Feb 2022 2:53 pm
by Waylander
Hi All
Just joined today, had a weather station for years but only just started to use this software,
I have got it running on windows 10 no problem, I have a web space on 1 and 1 setup the web files and got the FTP working, but sadly I cant seem to get the gauges to work,
the now page works as does every other, but not the flashy bit
any help would be great
Re: I cant get the gauges to work
Posted: Fri 18 Feb 2022 3:55 pm
by water01
Look in the Internet Settings / interval Configuration / Real time Interval Settings and check that Generate and FTP are ticked next to realtimegauges.txt .
Re: I cant get the gauges to work
Posted: Fri 18 Feb 2022 4:08 pm
by Waylander
Hi
I am sure i have it correct,
I have checked the interval timings are all set to 5 mins too,
it never changes from loading..... 1sec and green button
here are the interval settings
Re: I cant get the gauges to work
Posted: Fri 18 Feb 2022 11:13 pm
by water01
Those seem correct although you should not have copy ticked unless you are copying the files elsewhere, just generate and ftp.
Try turning on FTP logging to see if the file is being correctly FTP'd to your site.
Also a link to your website would help us debug this.
Re: I cant get the gauges to work
Posted: Mon 21 Feb 2022 4:28 pm
by Waylander
Hi
The website is here
https://www.oldpanels.com/weather/
just a bit of a test on our website, i have attached the ftp log too
Re: I cant get the gauges to work
Posted: Mon 21 Feb 2022 4:57 pm
by Dennisdg
The gauges seem to be working now.
Re: I cant get the gauges to work
Posted: Mon 21 Feb 2022 8:08 pm
by Waylander
now that is just really random
I left the station plugged into the PC while i went to a meeting came back and they are working, makes me look a little silly, no change there