Is here anyone that can help me with a problem.
I have a Davis VP2 pro and an meteobridge nanoSD firmware V5.2.
The nano reads the data from the station.
Then I have on my computer CumulusMX and entered the IP from the nano in CumulusMX and CumulusMX read the data.
The problem is that I see the tekst below in the nano log.
logger (22.01.2022 19:49:29): station 0 (Vantage), 192.168.2.30's 2nd request on port 22222 declined.
logger (22.01.2022 19:49:29): station 0 (Vantage), connection on port 22222 closed.
And in the cumulusMX diag file I see the tekst below.
Code: Select all
2022-01-22 19:49:16.956 Realtime[255]: End cycle
2022-01-22 19:49:17.001 WaitForACK: Received - 4F
2022-01-22 19:49:17.001 WaitForACK: Received - 14
2022-01-22 19:49:17.001 WaitForAck: Timed out
2022-01-22 19:49:17.002 SendLoopCommand: Sending command - LOOP 50, attempt 3
2022-01-22 19:49:17.002 SendLoopCommand: Wait for ACK
2022-01-22 19:49:17.003 WaitForACK: Starting
2022-01-22 19:49:17.503 WaitForACK: Received - 00
2022-01-22 19:49:17.503 WaitForACK: Received - DD
2022-01-22 19:49:17.503 WaitForAck: Timed out
2022-01-22 19:49:17.504 SendLoopCommand: Failed to get a response after 3 attempts, reconnecting the station
2022-01-22 19:49:17.504 InitTCP: Connecting to the station
2022-01-22 19:49:17.505 OpenTcpPort: TCP Logger Connect attempt 1
2022-01-22 19:49:18.510 OpenTcpPort: TCP Logger reconnected
2022-01-22 19:49:18.510 InitTCP: Flushing input stream
2022-01-22 19:49:20.511 InitTCP: Sending TEST (1) command
2022-01-22 19:49:20.512 InitTCP: Error - Unable to write data to the transport connection: The software on your host computer has lost a connection.
2022-01-22 19:49:20.512 SendLoopCommand: Reconnected to station
2022-01-22 19:49:20.512 InitTCP: Connecting to the station
2022-01-22 19:49:20.513 OpenTcpPort: TCP Logger Connect attempt 1
2022-01-22 19:49:21.518 OpenTcpPort: TCP Logger reconnected
2022-01-22 19:49:21.518 InitTCP: Flushing input stream
2022-01-22 19:49:24.529 InitTCP: Sending TEST (1) command
2022-01-22 19:49:26.930 InitTCP: TEST (1) received - '0A-0D-54-45-53-54-0A-0D'
2022-01-22 19:49:26.930 InitTCP: TEST (1) successful
2022-01-22 19:49:26.930 InitTCP: Connection confirmed
2022-01-22 19:49:26.931 SendLoopCommand: Starting - LOOP 50
2022-01-22 19:49:27.431 SendLoopCommand: Sending command - LOOP 50, attempt 1
2022-01-22 19:49:27.431 SendLoopCommand: Wait for ACK
2022-01-22 19:49:27.432 WaitForACK: Starting
2022-01-22 19:49:27.932 WaitForACK: ACK received
2022-01-22 19:49:27.932 LOOP: Data - 1: 4C-4F-4F-14-00-DD-02-62-77-76-02-28-A7-01-02-01-DF-00-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-5A-FF-FF-FF-FF-FF-FF-FF-00-00-00-00-00-00-00-FF-FF-00-00-58-00-58-00-00-00-0E-00-0E-00-FF-FF-FF-FF-FF-FF-FF-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-21-03-06-09-3F-03-AF-06-0A-0D-9D-E8
2022-01-22 19:49:27.933 LOOP: 1 - Data packet is good
2022-01-22 19:49:27.941 LOOP: Data - 2: 4C-4F-4F-14-00-DD-02-62-77-76-02-28-A7-01-02-01-DF-00-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-5A-FF-FF-FF-FF-FF-FF-FF-00-00-00-00-00-00-00-FF-FF-00-00-58-00-58-00-00-00-0E-00-0E-00-FF-FF-FF-FF-FF-FF-FF-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-21-03-06-09-3F-03-AF-06-0A-0D-9D-E8
2022-01-22 19:49:27.941 LOOP: 2 - Data packet is good
2022-01-22 19:49:29.486 LOOP: Data - 3: 4C-4F-4F-14-00-DD-02-62-77-76-02-28-A7-01-01-01-DF-00-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-5A-FF-FF-FF-FF-FF-FF-FF-00-00-00-00-00-00-00-FF-FF-00-00-58-00-58-00-00-00-0E-00-0E-00-FF-FF-FF-FF-FF-FF-FF-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-21-03-06-09-3F-03-AF-06-0A-0D-BE-CE
2022-01-22 19:49:29.486 LOOP: 3 - Data packet is good
2022-01-22 19:49:30.852 Realtime[0]: Start cycle
I can start the upload again to go to the menu station in the nano and save (without making any changes).
I already install firmware 5.0 on the nano but the same problem.
Also i make the event with script "http://templates.meteobridge.com/nodatareboot.sh" but the nano never reboot when the logger stops.
So what's wrong in my cumulusMX settings or in the nano settings.
br,
Arnaut