I have found them to be good too, but I have just had a second failure.
On the first they replaced the entire sensor array (W69) when it stopped communicating, with just under a month to go on warranty. Now 15 months later, my temp and humidity sensor has stopped sending data. So I am out of warranty.
I have been going back and forth with support. I was dealing with a "Lucy" originally but there seems to be a new person now. Their latest suggestion is to buy a new temp & humidity sensor part and replace that. Unfortunately, they are out of stock on that part.
Sadly I tossed out the old array only a couple of months ago - I could have tried scavenging the temp & humidity segment, but it's the old story.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Very impressed.
- Gyvate
- Posts: 295
- Joined: Wed 16 Dec 2020 2:14 pm
- Weather Station: GW1x00/WH2650WiFi/HP2553/GW2000
- Operating System: Win 11 (PC/RPi), Raspbian 11,WSL
- Location: Saarbrücken, Germany
- Contact:
Re: Very impressed.
Ecowitt have two options:
a) just the temp/hum sensor to be exchanged ( 5 USD)
the picture shows the same sensor from top and down perspective - the little "pocket" with holes is part of it and covers the sensor end b) the whole T/H/rain part (16 USD) the T/H sensor only they might have on stock - would be worth asking
a) just the temp/hum sensor to be exchanged ( 5 USD)
the picture shows the same sensor from top and down perspective - the little "pocket" with holes is part of it and covers the sensor end b) the whole T/H/rain part (16 USD) the T/H sensor only they might have on stock - would be worth asking
You do not have the required permissions to view the files attached to this post.
Meteotemplate http://meshka.eu/meteo/template
pwsDashboard http://meshka.eu/pwsWD
CumulusMX http://meshka.eu/CumulusMX
CUtils http://meshka.eu/CUtils
overview (more): http://meshka.eu
pwsDashboard http://meshka.eu/pwsWD
CumulusMX http://meshka.eu/CumulusMX
CUtils http://meshka.eu/CUtils
overview (more): http://meshka.eu
- mcrossley
- Posts: 12697
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Very impressed.
Looks identical to the T/H sensor they sent me for a WS80.
- Gyvate
- Posts: 295
- Joined: Wed 16 Dec 2020 2:14 pm
- Weather Station: GW1x00/WH2650WiFi/HP2553/GW2000
- Operating System: Win 11 (PC/RPi), Raspbian 11,WSL
- Location: Saarbrücken, Germany
- Contact:
Re: Very impressed.
unless you have a 2nd generation WS80, the T/H outdoor sensors are identical (SHT31) - the 2nd generation has a Sensirion SHT40).
Meteotemplate http://meshka.eu/meteo/template
pwsDashboard http://meshka.eu/pwsWD
CumulusMX http://meshka.eu/CumulusMX
CUtils http://meshka.eu/CUtils
overview (more): http://meshka.eu
pwsDashboard http://meshka.eu/pwsWD
CumulusMX http://meshka.eu/CumulusMX
CUtils http://meshka.eu/CUtils
overview (more): http://meshka.eu