Hi all,
I have loaded the cumulus pi image onto a Pi Zero W. I have setup wifi and can access the Pi through Putty with no issue.
The problem is I cant access the cumulus screen with either http://cumulusmx:8998 or http://<my ip adress for the pi>:8998.
I get the error "This site can’t be reached"
I have another setup with a Raspberry Pi 4 with the cumulus image, connected with ethernet cable with no issues.
Thanks,
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Raspberry Pi zero W setup
Moderator: mcrossley
-
dahl327
- Posts: 10
- Joined: Wed 25 Dec 2019 3:23 am
- Weather Station: vantage vue
- Operating System: Linux MX
Raspberry Pi zero W setup
You do not have the required permissions to view the files attached to this post.
-
mcrossley
- Posts: 14388
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Raspberry Pi zero W setup
iirc the Pi Zero uses a different processor architecture to the 3/4 and some things that were installed in the pre-built Pi image need recompiling to work on it - Mono is one of those (again iirc).
End result, for the Pi Zero do not use the pre-built image, you have to install the components directly on a clean OS install.
End result, for the Pi Zero do not use the pre-built image, you have to install the components directly on a clean OS install.