No rain data from WLL

[avpman]

NOOB here so please excuse me if I did something dumb. My CumulusMX logs and dials show no rainfall. But if I go on my Davis WLL site it does indeed show rainfall for today. CumulusMX is connected to the Davis WLL 6102 device.

[mcrossley]

Have you set the rain sensor to the correct transmitter id in the config?

if that is correct...
Please switch on data logging and after it has run for another 5-10 mins then post the latest MXdiags file here - you can switch then off the logging.

[avpman]

Rain sensor ID: Do you mean this setting in the CumulusMX settings page (please see attached)
Data logging: Please excuse my ignorance, where do I switch on "data logging?" If you mean the "Dayfile Viewer/Editor," it currently shows all zeros in the rainfall data columns.
"

[avpman]

Found the logging option, will post diags in a bit - Thanks!

[avpman]

Attached is the current log. Thank you for your time!

20211026-100005.txt

[mcrossley]

Cumulus is not receiving any broadcast messages from your WLL station.

I'd check first that your WiFi network is set the "Private", not "Public"

[avpman]

It is set to home. everything else, all other sensors, are recording

[avpman]

If it's not receiving any broadcast then where is the other data coming from? www.varrone.net/weather

[mcrossley]

It reads the station directly every so often. But those responses are also erroring.

Please switch on debug AND data logging, leave it half and hour this time and the send the file again.

[avpman]

I found the problem - I'm a dumb arss. Please excuse the post!