Pressure Gauge.

[Phil23]

Any ideas why I an seen a red background on one of my sites.

Pressure Gauge.JPG

I am seeing it in the Interface, as well as both the websites.

http://s7.inverellit.com/gauges.htm
http://s7.inverellit.com/cu

My other very similar Ecowitt Site is fine though.

http://w2.inverellit.com/gauges.htm

Considering it's in both the interface an the Web sites I thought it may be related to a Limit setting , but can't seen anything in the settings.

Any ideas?

Thanks

Phil.

[beteljuice]

Red is simply pressure not yet experienced.

Is the data for that site 'new' ?

[Phil23]

Yes,

Thanks for that Beleljuice.
Was not aware of that fact; hair torn here for a bit...

It only went live on Thursday morning, so data is just past the 48 hour mark.
Obviously it looked fine during all may tests before sending it away, as it was using an existing data set.

Cheers

Phil.

[HansR]

It probably also has to do with the min/max values received and recorded in the alltime records.
You took them probably from your original site?
The limits of the gauge are (afaik) taken from the alltime records file.

[Phil23]

It probably also has to do with the min/max values received and recorded in the alltime records.
You took them probably from your original site?

No Shouldn't be. When I started it up on the remote site it had an empty data data directory.
Which does bring up one point.

CMX was started @ 8:55am on 19/08/2021, roll over at 9:00.
So the first entry in the dayfile is 18/08/2021 & the ini file shows StartDate=Thursday, 19 August 2021.

Obviously entries in the other data ini files that show 8:55 on the 19th will disappear over time,
but would it be worth dropping that first dayfile enrty?

Cheers

Phil.

[mcrossley]

Obviously entries in the other data ini files that show 8:55 on the 19th will disappear over time,
but would it be worth dropping that first dayfile enrty?

I would, it will affect your records if you look at some lesser used ones like min. temperature range, average daily temperature etc.