Just came across this,
No Blue trace for Temperature in the Interface Chart.
All the other plots are present, but the Temperature trace needs to be turned off then on again via the legend to make it display.
Cheers
Phil.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Temp Missing in Console Chart.
Moderator: mcrossley
-
Phil23
- Posts: 888
- Joined: Sat 16 Jul 2016 11:59 pm
- Weather Station: Davis VP2+ & GW1000 (Standalone)
- Operating System: Win10 Pro / rPi Buster
- Location: Australia
Temp Missing in Console Chart.
:Now: :Today/Yesterday:
Main Station Davis VP2+ Running Via Win10 Pro.
Secondary Stations, Ecowitt HP2551/GW1000 Via rPi 3 & 4 Running Buster GUI.
:Local Inverell Ecowitt Station: :Remote Ashford Ecowitt Station:
Main Station Davis VP2+ Running Via Win10 Pro.
Secondary Stations, Ecowitt HP2551/GW1000 Via rPi 3 & 4 Running Buster GUI.
:Local Inverell Ecowitt Station: :Remote Ashford Ecowitt Station:
-
mcrossley
- Posts: 14388
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Temp Missing in Console Chart.
I cannot reproduce this, it works OK for me. Try forcing a page update in your browser - usually Ctrl-F5
-
Phil23
- Posts: 888
- Joined: Sat 16 Jul 2016 11:59 pm
- Weather Station: Davis VP2+ & GW1000 (Standalone)
- Operating System: Win10 Pro / rPi Buster
- Location: Australia
Re: Temp Missing in Console Chart.
Hmmm,
I can still see it here on 1 of 3 sites for example. (All 3 are the same).
https://s7.inverellit.com/trends.htm
Did just re-upload the charts.js to that site & behavior is still the same.
I could be confused, as maybe it is sitting under Heat index, Humidex or Wind chill.
Still trying to decide on that.
Will poke about a bit more to try & define the correct facts.
Thanks
Phil.
I can still see it here on 1 of 3 sites for example. (All 3 are the same).
https://s7.inverellit.com/trends.htm
Did just re-upload the charts.js to that site & behavior is still the same.
I could be confused, as maybe it is sitting under Heat index, Humidex or Wind chill.
Still trying to decide on that.
Will poke about a bit more to try & define the correct facts.
Thanks
Phil.
:Now: :Today/Yesterday:
Main Station Davis VP2+ Running Via Win10 Pro.
Secondary Stations, Ecowitt HP2551/GW1000 Via rPi 3 & 4 Running Buster GUI.
:Local Inverell Ecowitt Station: :Remote Ashford Ecowitt Station:
Main Station Davis VP2+ Running Via Win10 Pro.
Secondary Stations, Ecowitt HP2551/GW1000 Via rPi 3 & 4 Running Buster GUI.
:Local Inverell Ecowitt Station: :Remote Ashford Ecowitt Station:
-
Mapantz
- Posts: 1992
- Joined: Sat 17 Dec 2011 11:55 am
- Weather Station: Davis Vantage Pro2
- Operating System: Windows 11 x64
- Location: Dorset - UK
- Contact:
Re: Temp Missing in Console Chart.
It's the zindex ..
When the graph first loads, the other lines are sitting on top of it. If you disable feels like (or others) and enable it again, the temp line is on top.
It's because one or more of the other data points match the temperature's data points.
When the graph first loads, the other lines are sitting on top of it. If you disable feels like (or others) and enable it again, the temp line is on top.
It's because one or more of the other data points match the temperature's data points.