Welcome to the Cumulus Support forum.

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Cumulus MX V4 beta test release 4.0.0 (build 4017) - 17 March 2024

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

WeatherDuino Air Quality Monitor - AQM III

For discussion of DIY weather equipment - sensors, accessories, improvements to existing kit etc
User avatar
Werk_AG
Posts: 198
Joined: Sun 13 Jan 2013 8:04 pm
Weather Station: WeatherDuino 4Pro
Operating System: Windows 7
Location: Cercal CDV - Portugal
Contact:

WeatherDuino Air Quality Monitor - AQM III

Post by Werk_AG »

Launched today.
Visualize your Air Quality data on CumulusMX , and, if you want, share it with everyone on Sensor Community.

Image

For more info, please visit this page: https://www.meteocercal.info/forum/Thre ... I-Overview
Last edited by Werk_AG on Thu 19 Aug 2021 4:51 am, edited 1 time in total.
User avatar
Werk_AG
Posts: 198
Joined: Sun 13 Jan 2013 8:04 pm
Weather Station: WeatherDuino 4Pro
Operating System: Windows 7
Location: Cercal CDV - Portugal
Contact:

Re: WeatherDuino Air Quality Monitor - AQM III

Post by Werk_AG »

Real time data from a few WeatherDuino Air Quality Monitor III devices: https://weatherduino.aqi.eco/en
Image
The freedom to choose the weather instruments you want
Phil23
Posts: 884
Joined: Sat 16 Jul 2016 11:59 pm
Weather Station: Davis VP2+ & GW1000 (Standalone)
Operating System: Win10 Pro / rPi Buster
Location: Australia

Re: WeatherDuino Air Quality Monitor - AQM III

Post by Phil23 »

Yes,

Saw this a few weeks back & very interested as I already have two SPS30's & also tes SDS011's sitting in the drawer.

Just not sure what freight would be like to Aus at present; there are many things that are delayed for months.

Also have a had full of micro's which I assume are the same.
Is it therefore possible to make my own based on what I have on hand?

Cheers

Phil.
:Now: :Today/Yesterday:

Image

Main Station Davis VP2+ Running Via Win10 Pro.
Secondary Stations, Ecowitt HP2551/GW1000 Via rPi 3 & 4 Running Buster GUI.
:Local Inverell Ecowitt Station: :Remote Ashford Ecowitt Station:
zoomx
Posts: 65
Joined: Sat 15 Mar 2014 4:50 pm
Weather Station: Froggit GW1000
Operating System: Windows-Linux
Location: Italy

Re: WeatherDuino Air Quality Monitor - AQM III

Post by zoomx »

I made this
https://sensor.community/en/sensors/airrohr/

Anyway that PM sensors have a serial port so you can write your firmware, if you want.
Airrohr firmware it's open source, you can find it on Github. You can modidy it if you want.
User avatar
HansR
Posts: 5870
Joined: Sat 20 Oct 2012 6:53 am
Weather Station: GW1100 (WS80/WH40)
Operating System: Raspberry OS/Bullseye
Location: Wagenborgen (NL)
Contact:

Re: WeatherDuino Air Quality Monitor - AQM III

Post by HansR »

Nice. The simulation of the AirLink to make it connect to CMX is great.

But the sensor community (Luftdaten / Sensor Cummunity) has a far wider range and it would have been nice if - apart from the AirLink simulation - connection to the Sensor Community project would have been possible.

Edit: I just read that it IS COMPATIBLE with Sensor Community. Afaiac this makes it the first choice for me! The only think to make is an external (solar)power source so that I can place it at a convenient location without cables.
Last edited by freddie on Thu 19 Aug 2021 9:30 am, edited 1 time in total.
Reason: Typo in [url]
User avatar
HansR
Posts: 5870
Joined: Sat 20 Oct 2012 6:53 am
Weather Station: GW1100 (WS80/WH40)
Operating System: Raspberry OS/Bullseye
Location: Wagenborgen (NL)
Contact:

Re: WeatherDuino Air Quality Monitor - AQM III

Post by HansR »

And to add: it would be nice if CMX with its several possibilities for AQ sensors would have support for Sensor Community!
I'll make a request.
Hans

https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
Phil23
Posts: 884
Joined: Sat 16 Jul 2016 11:59 pm
Weather Station: Davis VP2+ & GW1000 (Standalone)
Operating System: Win10 Pro / rPi Buster
Location: Australia

Re: WeatherDuino Air Quality Monitor - AQM III

Post by Phil23 »

Thing that caught my eye was the support of the AirLink API.

Anything that emulates that API & is ESP32 based is certainly of interest.
(I am aware that @HansR now has some ESP32 programming experience). :D :D

Phil.
:Now: :Today/Yesterday:

Image

Main Station Davis VP2+ Running Via Win10 Pro.
Secondary Stations, Ecowitt HP2551/GW1000 Via rPi 3 & 4 Running Buster GUI.
:Local Inverell Ecowitt Station: :Remote Ashford Ecowitt Station:
User avatar
Werk_AG
Posts: 198
Joined: Sun 13 Jan 2013 8:04 pm
Weather Station: WeatherDuino 4Pro
Operating System: Windows 7
Location: Cercal CDV - Portugal
Contact:

Re: WeatherDuino Air Quality Monitor - AQM III

Post by Werk_AG »

Phil23 wrote: Thu 19 Aug 2021 5:19 am ...
Saw this a few weeks back & very interested as I already have two SPS30's & also tes SDS011's sitting in the drawer.

Just not sure what freight would be like to Aus at present; there are many things that are delayed for months.
...
Hi Phil,

Interestingly, most of WeatherDuino users are from AU and NZ, maybe because some years ago the Silicon Chip magazine published during four consecutive editions a long article about the WeatherDuino weather stations (current systems are much more advanced than the ones reviewed at that time).

Still send many things to AU, and shipping usually took 18 to 28 days, sometimes less.

Werk_AG
Last edited by Werk_AG on Thu 19 Aug 2021 10:01 pm, edited 2 times in total.
Image
The freedom to choose the weather instruments you want
User avatar
Werk_AG
Posts: 198
Joined: Sun 13 Jan 2013 8:04 pm
Weather Station: WeatherDuino 4Pro
Operating System: Windows 7
Location: Cercal CDV - Portugal
Contact:

Re: WeatherDuino Air Quality Monitor - AQM III

Post by Werk_AG »

HansR wrote: Thu 19 Aug 2021 8:25 am
But the sensor community (Luftdaten / Sensor Cummunity) has a far wider range and it would have been nice if - apart from the AirLink simulation - connection to the Sensor Community project would have been possible.

Edit: I just read that it IS COMPATIBLE with Sensor Community. Afaiac this makes it the first choice for me! The only think to make is an external (solar)power source so that I can place it at a convenient location without cables.
Hi,

The data from the AQM III sensors presented here: https://weatherduino.aqi.eco/en
is firstly sent by each sensor to Sensor Community, then using the resources of https://aqi.eco/en, I aggregated the data from some of them in one page.

Werk_AG
Image
The freedom to choose the weather instruments you want
Phil23
Posts: 884
Joined: Sat 16 Jul 2016 11:59 pm
Weather Station: Davis VP2+ & GW1000 (Standalone)
Operating System: Win10 Pro / rPi Buster
Location: Australia

Re: WeatherDuino Air Quality Monitor - AQM III

Post by Phil23 »

Werk_AG wrote: Thu 19 Aug 2021 9:38 pm some years ago the Silicon Chip magazine published during four consecutive editions a long article about the WeatherDuino
Do you know the Year & Editions?
I have over 20 years worth of Silicon Chip Mags sitting on the shelf here.

Phil.
:Now: :Today/Yesterday:

Image

Main Station Davis VP2+ Running Via Win10 Pro.
Secondary Stations, Ecowitt HP2551/GW1000 Via rPi 3 & 4 Running Buster GUI.
:Local Inverell Ecowitt Station: :Remote Ashford Ecowitt Station:
User avatar
Werk_AG
Posts: 198
Joined: Sun 13 Jan 2013 8:04 pm
Weather Station: WeatherDuino 4Pro
Operating System: Windows 7
Location: Cercal CDV - Portugal
Contact:

Re: WeatherDuino Air Quality Monitor - AQM III

Post by Werk_AG »

zoomx wrote: Thu 19 Aug 2021 7:26 am ...
Airrohr firmware it's open source, you can find it on Github. You can modidy it if you want.
The AQM III firmware is also open source and can be modified as you want, however, currently the source code is only available to those who are building WeatherDuino devices.
Image
The freedom to choose the weather instruments you want
User avatar
Werk_AG
Posts: 198
Joined: Sun 13 Jan 2013 8:04 pm
Weather Station: WeatherDuino 4Pro
Operating System: Windows 7
Location: Cercal CDV - Portugal
Contact:

Re: WeatherDuino Air Quality Monitor - AQM III

Post by Werk_AG »

Phil23 wrote: Thu 19 Aug 2021 10:18 pm
Werk_AG wrote: Thu 19 Aug 2021 9:38 pm some years ago the Silicon Chip magazine published during four consecutive editions a long article about the WeatherDuino
Do you know the Year & Editions?
I have over 20 years worth of Silicon Chip Mags sitting on the shelf here.

Phil.
First article was published on March 2015, the other three on the following editions (Apr, May and Jun 2015).

Image
Image
The freedom to choose the weather instruments you want
User avatar
laulau
Posts: 678
Joined: Tue 13 Oct 2009 10:52 pm
Weather Station: WeatherDuino Pro2
Operating System: Win 7
Location: Meyenheim, Alsace, FR
Contact:

Re: WeatherDuino Air Quality Monitor - AQM III

Post by laulau »

Hi,
Is there a way to have the CO2 value read by CMX ?
Thanks
Laurent

Image
User avatar
HansR
Posts: 5870
Joined: Sat 20 Oct 2012 6:53 am
Weather Station: GW1100 (WS80/WH40)
Operating System: Raspberry OS/Bullseye
Location: Wagenborgen (NL)
Contact:

Re: WeatherDuino Air Quality Monitor - AQM III

Post by HansR »

laulau wrote: Wed 17 May 2023 8:14 am Hi,
Is there a way to have the CO2 value read by CMX ?
Thanks
As far as I know: no you can't.
I don't think even the Custom Logs can't, simply because there is no webtag for it.
Or am I missing something @Mark?
Hans

https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
User avatar
HansR
Posts: 5870
Joined: Sat 20 Oct 2012 6:53 am
Weather Station: GW1100 (WS80/WH40)
Operating System: Raspberry OS/Bullseye
Location: Wagenborgen (NL)
Contact:

Re: WeatherDuino Air Quality Monitor - AQM III

Post by HansR »

laulau wrote: Wed 17 May 2023 8:14 am Hi,
Is there a way to have the CO2 value read by CMX ?
Thanks
As far as I can see now, the only possibility to chart the value is to implement it as an External Extra Sensor in CUtils.
Any other way you will have to make something yourself I assume.
Hans

https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
Post Reply