Cumulus Support

Same here with a gw1100, a gw1000 connects fine though.

I am also at home so it could be an Ecowitt prob. I usually expect it's ME again

With WSView Plus no issue here it seems (in NL, version 2.0.38 of the phone app) with two GW1100.
Is it a specific UK thing? That would be interesting...

Mines working again this morning.

Today it is working again! Weird as nothing has changed at my end. I wonder if the app is doing some sort of phone home even when connecting locally?

People on the wx forum were reporting the same behaviour yesterday.

Same here but not staying on,( as last few days where the main data is only shown for 30 to 60 sec's.before going back to the device select screen. Apps are on an android phone version 8.0.0)
CMX is OK as is the older WS View just the plus version

Installed Plus onto the wife's tab running android 13.0 and same result.

there seems to be an issue in the context of the newly introduced WLAN switch on/off feature and static and dynamic IP addresses with the GW2000.
The issue is reported to Ecowitt support.
The strange WS View Plus behaviour can be circumvented by choosing the the "More" and then e.g. the "Weather Services" option while the egg-timer (rotating circle) is still on. This should work. After that coming back to live data works.
Looks like WS View + gets stuck waiting for an initial API response.
The issue is most likely not with WS View Plus but with the new firmware (2.2.3).
Similar things could be with the GW1100 as it shares most of the firmware code with the GW2000.

My GW110C is running V2.2.3. Did the more bit while it was trying to connect and yes it now stays connected for a lot longer than it was doing, but still goes back to the select device screen. Any checking I was doing should be done long before it fails, so not a problem now THANKS for the advice.

Gyvate wrote: ↑Sat 18 Mar 2023 11:04 am The issue is most likely not with WS View Plus but with the new firmware (2.2.3).
Similar things could be with the GW1100 as it shares most of the firmware code with the GW2000.

No problems here with GW1100 running v2.2.1 so the theory about firmware related issue seems plausible.

A while back I got a GW1100C to be able to read an old WH24 sensor array which is long gone and replaced with a HP2552. IS changing data to CMX as simple as changing the IP and mac address from the GW100 to the HP2552 ones and save?

Answer my own question. NO it's not that simple, changed the name to HP2552, also changed the IP and MAC addresses but no data was downloaded Diag. attached. Not sure if it's something I still need to do or an error with the HP2551CA console
I want to change to the HP console as the solar data is not being entered in the morning by the GW1100 but shows ok on the console data

Have you set up the Hp2551/2 to output to a customised output in the weather server output?

Should be set to Enable , Same as Ecowitt, Ip address of your receiving computer, port 8998, interval 16 seconds, /station/ecowitt

No I just changed the IP and MAC that was set up for the GW1100C I thought they would be the same. CMX does connect then disconnects

I have just noticed that I didn't change the MAC address in Ecowitt Local API Settings if that makes a difference also I do not have a web page