Page 1 of 3
CumulusMX v3.9.3 b3098
Posted: Sat 19 Dec 2020 5:58 pm
by PaulMy
Hi Mark,
Looks and working good.
No issue as just reporting on what I see with the update:
Not sure if it is the update AirLink fix but I can certainly see a difference for the better in the Trends AirQuality.
This
http://www.komokaweather.com/cumulusmx/trends.htm is the link to the updated version and looking at the AirQuality 6h chart there is a drastic change from the time I updated b3097 to b3098 at 10:55 this morning - a big improvement!
Nothing else done, just CMX update. This is connected with WiFiLogger, and AirLink in the settings WITH Weatherlink API key and secret, and Outdoor AirLink IP address and Station ID.
This
http://www.komokaweather.com/cumulusmxwll/trends.htm is the link to the b3097 running at the same time.
It is connected with WLL, and AirLink in the settings WITHOUT the Weatherlink API key and secret, and Outdoor AirLink IP address and Station ID. Graphs look very good. I will update CMX later today.
The only difference is that the first one has Graphs were set at 48 hrs and the other had at 24 hours. I now have both at 48 hrs.
Enjoy,
Paul
Re: CumulusMX v3.9.3 b3098
Posted: Sat 19 Dec 2020 8:50 pm
by Phil23
Just loaded it here.
I noticed this though...
Code: Select all
- No historic data available
Missing AirLink WeatherLink API key/secret in the cumulus.ini file
Connecting real time FTP
My Airlink is standalone, although I do have an account, it's not a Pro Subscription.
Not sure which settings I need to change? Do I need to add the API info despite the Standard Users Account?
Thanks
Phil.
Re: CumulusMX v3.9.3 b3098
Posted: Sat 19 Dec 2020 9:06 pm
by Mapantz
Phil23 wrote: ↑Sat 19 Dec 2020 8:50 pm
Just loaded it here.
I noticed this though...
Code: Select all
- No historic data available
Missing AirLink WeatherLink API key/secret in the cumulus.ini file
Connecting real time FTP
My Airlink is standalone, although I do have an account, it's not a Pro Subscription.
Not sure which settings I need to change? Do I need to add the API info despite the Standard Users Account?
Thanks
Phil.
No need to add anything, that's a standard message that has been there for a couple of versions now..
Re: CumulusMX v3.9.3 b3098
Posted: Sat 19 Dec 2020 9:23 pm
by mcrossley
Phil23 wrote: ↑Sat 19 Dec 2020 8:50 pm
My Airlink is standalone, although I do have an account, it's not a Pro Subscription.
Not sure which settings I need to change? Do I need to add the API info despite the Standard Users Account?
Without a Pro subscription you cannot access any historic for catch-up or health data, so no need to enter anything.
Re: CumulusMX v3.9.3 b3098
Posted: Sat 19 Dec 2020 9:27 pm
by Phil23
mcrossley wrote: ↑Sat 19 Dec 2020 9:23 pm
so no need to enter anything.
So just an informative message that can be ignored.
Re: CumulusMX v3.9.3 b3098
Posted: Sat 19 Dec 2020 11:27 pm
by jon_iz
WRT: New: If enabled, the daily graph data files are now created at start-up and uploaded at first interval FTP. Previously you had to wait for the first EOD rollover.
I must be missing the obvious - i can't see the setting for this to enable it.
Whilst i took a copy of the file structure, before dropping the new files over the top (so I could recover the file), I note that the first FTP upload has removed the historic graphs, so I assume that the file is not being created, but I can't see anything new in settings or cumulus.ini?
Doing a file comparison, the only new lines I can see that have been dropped into Cumulus.ini relate to the alert for new version:
UpgradeAlarmSet=1
UpgradeAlarmSound=1
UpgradeAlarmSoundFile=alarm.mp3
UpgradeAlarmNotify=1
UpgradeAlarmLatch=0
UpgradeAlarmHours=0
Re: CumulusMX v3.9.3 b3098
Posted: Sat 19 Dec 2020 11:43 pm
by M1DUL
Hi Jon,
I have also noticed a blank page on my historic.htm page.
Hopefully it will stat working again at the end of the day.
Regards
Mike
Re: CumulusMX v3.9.3 b3098
Posted: Sun 20 Dec 2020 12:35 am
by jon_iz
M1DUL wrote: ↑Sat 19 Dec 2020 11:43 pm
Hi Jon,
I have also noticed a blank page on my historic.htm page.
Hopefully it will stat working again at the end of the day.
Regards
Mike
EOD rollover has completed, and historic graphs have not re-populated.
Mark, anything to check?
Re: CumulusMX v3.9.3 b3098
Posted: Sun 20 Dec 2020 12:56 am
by PaulMy
I have also noticed a blank page on my historic.htm page.
Do you get this error with an F12 Console in your browser Historic page?
Code: Select all
historic.htm:1 Refused to load the script 'http://branksomeweather.co.uk/lib/jquery/jquery-latest.min.js' because it violates the following Content Security Policy directive: "script-src code.highcharts.com". Note that 'script-src-elem' was not explicitly set, so 'script-src' is used as a fallback.
historic.htm:1 Refused to load the script 'http://branksomeweather.co.uk/js/historiccharts.js' because it violates the following Content Security Policy directive: "script-src code.highcharts.com". Note that 'script-src-elem' was not explicitly set, so 'script-src' is used as a fallback.
Enjoy,
Paul
Re: CumulusMX v3.9.3 b3098
Posted: Sun 20 Dec 2020 8:26 am
by rogerthn
PaulMy wrote: ↑Sun 20 Dec 2020 12:56 am
Do you get this error with an F12 Console in your browser Historic page?
Code: Select all
historic.htm:1 Refused to load the script 'http://branksomeweather.co.uk/lib/jquery/jquery-latest.min.js' because it violates the following Content Security Policy directive: "script-src code.highcharts.com". Note that 'script-src-elem' was not explicitly set, so 'script-src' is used as a fallback.
historic.htm:1 Refused to load the script 'http://branksomeweather.co.uk/js/historiccharts.js' because it violates the following Content Security Policy directive: "script-src code.highcharts.com". Note that 'script-src-elem' was not explicitly set, so 'script-src' is used as a fallback.
Enjoy,
Paul
I do see those errors and where is the
New: If enabled, the daily graph data files are now created at start-up
PS
CumulusMX updated on
https://rogerthn.se/weather2/index.htm while
https://rogerthn.se/weather2/index.htm still run v3.9.2 (3097)
Re: CumulusMX v3.9.3 b3098
Posted: Sun 20 Dec 2020 8:46 am
by Phil23
Just noticed I'm also not seeing historic charts here.
They were on my site with the previous release, but not there now.
Still present & Ok in the interface.
I did my upgrade this morning, about an hour before my 9:00am roll over.
Phil.
Re: CumulusMX v3.9.3 b3098
Posted: Sun 20 Dec 2020 8:50 am
by jon_iz
Yes, I have those errors. relevant to my domain of course..
Refused to load the script '
https://www.duncreggan.net/cumulusmx/li ... est.min.js' because it violates the following Content Security Policy directive: "script-src code.highcharts.com". Note that 'script-src-elem' was not explicitly set, so 'script-src' is used as a fallback.
historic.htm:1 Refused to load the script '
https://www.duncreggan.net/cumulusmx/js ... ccharts.js' because it violates the following Content Security Policy directive: "script-src code.highcharts.com". Note that 'script-src-elem' was not explicitly set, so 'script-src' is used as a fallback.
Re: CumulusMX v3.9.3 b3098
Posted: Sun 20 Dec 2020 9:06 am
by M1DUL
Hi All,
This is my errors from the web console on my website, It was working OK in the last version 3097 but not in version 3098.
So something must have changed in the update.
Loading failed for the <script> with source “
http://branksomeweather.co.uk/lib/jquer ... est.min.js”. historic.htm:104:1
Content Security Policy: The page's settings blocked the loading of a resource at inline ("script-src"). 6 historic.htm
Content Security Policy: The page's settings blocked the loading of a resource at
http://branksomeweather.co.uk/lib/jquer ... est.min.js ("script-src").
Loading failed for the <script> with source “
http://branksomeweather.co.uk/js/historiccharts.js”. historic.htm:108:1
Content Security Policy: The page's settings blocked the loading of a resource at
http://branksomeweather.co.uk/js/historiccharts.js ("script-src").
Re: CumulusMX v3.9.3 b3098
Posted: Sun 20 Dec 2020 9:09 am
by Phil23
Similar thing here....
Code: Select all
Refused to load the script 'http://weather.inverellit.com/js/historiccharts.js' because it violates the following Content Security Policy directive: "script-src code.highcharts.com". Note that 'script-src-elem' was not explicitly set, so 'script-src' is used as a fallback.
Edit:.
Just tried reverting back to the previous release's historiccharts.js & still getting errors.
Re: CumulusMX v3.9.3 b3098
Posted: Sun 20 Dec 2020 9:36 am
by HansR
I found that when the AirLink indoor is set as primary there is still no chart for the AirLink data.
The airqualitydata is fetched OK (code 200). Apparently it is empty.