Page 1 of 1
pre-built Raspberry Pi Image
Posted: Mon 23 Nov 2020 4:43 pm
by rich_c
Can i use the pre-built Pi image using IP connection to connect Davis weather station
Thanks
Re: pre-built Raspberry Pi Image
Posted: Mon 23 Nov 2020 4:48 pm
by mcrossley
Sure - it's just Cumulus MX, you can configure it any way you can with any other install.
Re: pre-built Raspberry Pi Image
Posted: Mon 23 Nov 2020 4:49 pm
by rich_c
Great and thanks
Re: pre-built Raspberry Pi Image
Posted: Mon 23 Nov 2020 5:57 pm
by rich_c
Have been running cumulusmx on PC can i transfer the data folder to cumulus on the pi and if so how, am able to connect to pi using Filezilla see attachment
FTP connection.png
Re: pre-built Raspberry Pi Image
Posted: Mon 23 Nov 2020 6:14 pm
by rich_c
Also unable to stop cumulus using sudo systemctl stop cumulusmx
putty.png
Re: pre-built Raspberry Pi Image
Posted: Mon 23 Nov 2020 11:10 pm
by mcrossley
Cumulus is installed into the folder "/opt/CumulusMX", navigate there in FileZilla. Then you can just copy over the contents of the /data folder.
What does the Cumulus diags file show when you try and stop it?
Re: pre-built Raspberry Pi Image
Posted: Tue 24 Nov 2020 9:43 am
by rich_c
Mark i can not find the folder "/opt/CumulusMX i have now installed cumulusmx on raspberry pi using the original method and all is working fine thanks for help
Re: pre-built Raspberry Pi Image
Posted: Tue 24 Nov 2020 4:03 pm
by dazza1223
remove the home/pi and press enter
Capture.PNG
Re: pre-built Raspberry Pi Image
Posted: Tue 15 Dec 2020 7:53 pm
by rich_c
Finally have this running had to use WinSCP to gain access to opt/CumulusMX could not find in FileZilla probably something i am doing wrong , but showed up instantly using WinSCP