Cumulus Support

Hi Guys
I hope I'm in the right place for this if not sorry and could someone point me in the right direction.
I have been using Cumulus since 2012 and have no probs but just a while back I uploaded the new release it went well but had an update on my PC so went to start it up again and it wouldn't connect, well it would go as far as 'Last update+2020-10-02T15:30:00' whatever that means.
It then instructed me to zip the file MXdiags (that's downloaded here.) to the Cumulus forum
Thanks for reading and hopefully someone can help.
Using the 'other software' now but don't like it much.
Regards
Chris

From your diags file:
Therefore you have MX configured to access your station on port COM8, but your weather station isn't connected on that COM port. If you use the control panel to find out what port your station is actually connected to, then change your MX configuration to use this port in the settings screen, you should find MX will then connect to your station.

Hi Freddie
Seems to be running now OK on Com 6
Thanks for your time today and have a nice one
Cheers
Chris