Updating after _quite_ a while. I extracted 3.8.2 right over the top of my version 3.2.6. After some poking around I noticed the latest version did not display dewpoint.
I thought I did something wrong or it had been too long (and needed to do some multi-step upgrade process). Decided to take a backup and do a fresh install and reconnect to my WLL. Fresh install connecting to WLL (using automatic discovery) still doesn't show a dewpoint. When I roll back to the old version I get dewpoint. I'm wondering if maybe I found a bug?
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
3.8.2 WLL No Dewpoint
Moderator: mcrossley
-
ConligWX
- Posts: 1835
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 24.04.1 LTS
- Location: Bangor, NI
- Contact:
Re: 3.8.2 WLL No Dewpoint
Hi there.
I have a WLL and running the 3.8.2. Due Point working here just fine.
I would however suspect coming from 3.2.6 and going straight to the latest would cause some issues.
I have a WLL and running the 3.8.2. Due Point working here just fine.
I would however suspect coming from 3.2.6 and going straight to the latest would cause some issues.
-
mcrossley
- Posts: 14388
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: 3.8.2 WLL No Dewpoint
My WLL calculates/shows dew point on v3.8.2 as well.
I'd like to see a run of 3.8.2 started with the -debug command line parameter and the resulting log file.
It sounds like you didn't copy over your Cumulus.ini file from 3.2.6 to the 3.8.2 folder, any reason for that? Re-read, your post, I see why.
I'd like to see a run of 3.8.2 started with the -debug command line parameter and the resulting log file.
It sounds like you didn't copy over your Cumulus.ini file from 3.2.6 to the 3.8.2 folder, any reason for that? Re-read, your post, I see why.
-
mcrossley
- Posts: 14388
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: 3.8.2 WLL No Dewpoint
I have found the issue, the dew point threshold limit (default 40C) is applied to installations configured to use Fahrenheit as if it were a Fahrenheit value.
As a work around please set your dew point limit value to 999 in the calibration settings until I get a patch pushed out.
As a work around please set your dew point limit value to 999 in the calibration settings until I get a patch pushed out.
-
Mperor
- Posts: 8
- Joined: Sun 12 Jan 2014 6:37 pm
- Weather Station: Davis VP2 Plus and WLL
- Operating System: Win Server 2016 on ESXi
- Location: Bangor, ME, USA
Re: 3.8.2 WLL No Dewpoint
Perfect. Thank you! That did the trick. Never even would have looked there. If I had done the upgrade in the Winter that problem would have taken much longer to crop up. 
Running as a service now, too. Thank you for adding that!
Running as a service now, too. Thank you for adding that!