Page 1 of 1
Missing Charts.
Posted: Sat 15 Aug 2020 9:06 pm
by Phil23
Noticed this just now.
No data on my Temp or Humidity charts.
Both the tempdata & hum data json's in \web are empty.
They contain only
They were fine last night.
Only triggering thing I can think of is me adjusting the calibration setting for humidity, where I added a 1.01 multiplier.
I see a mention of malformed Json's in the 3090 release post, but not sure that relates to this case.
Cheers.
Phil.
Re: Missing Charts.
Posted: Sat 15 Aug 2020 10:02 pm
by Phil23
Have now removed the Humidity multiplier & upgraded to 3090, but still no charts.
It was @ 6:34am I changed the calibration.
I do notice a couple of multipliers of 0.000 which would seem invalid.
Code: Select all
2020-08-16 06:34:38.677 Updating calibration settings
2020-08-16 06:34:38.692 Writing Cumulus.ini file
2020-08-16 06:34:38.692 Completed writing Cumulus.ini file
2020-08-16 06:34:38.692 Setting new calibration values...
2020-08-16 06:34:38.692 Offsets and Multipliers:
2020-08-16 06:34:38.692 PO=0.000 TO=0.000 HO=0 WDO=0 ITO=0.000 SO=0.000 UVO=0.000
2020-08-16 06:34:38.708 PM=1.000 WSM=1.000 WGM=1.000 TM=1.000 TM2=0.000 HM=1.015 HM2=0.000 RM=1.000 SM=1.000 UVM=1.000
2020-08-16 06:34:38.708 Spike removal:
2020-08-16 06:34:38.708 TD=20.000 GD=10.000 WD=10.000 HD=999.000 PD=999.000 MR=999.000 MH=999.000
2020-08-16 06:34:38.708 Limits:
2020-08-16 06:34:38.708 TH=60.0 TL=-60.0 DH=40.0 PH=1090.00 PL=870.00 GH=90.000
2020-08-16 06:34:39.036 LOOP: Data - 15: 4C-4F-4F-14-00-22-06-1B-75-00-03-25-8A-01-00-00-73-00-A2-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-FF-61-FF-FF-FF-FF-FF-FF-FF-00-00-00-07-00-00-00-FF-FF-01-00-8B-00-E5-09-00-00-87-00-FE-0A-FF-FF-FF-FF-FF-FF-FF-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-13-03-06-2D-74-02-C4-06-0A-0D-F0-A9
Full Diags covering the period attached.
Mind you I'm not 100% sure when this started, but the graph was fine on Friday when I was checking in frequently following a sensor upgrade.
Phil.
Re: Missing Charts.
Posted: Sat 15 Aug 2020 10:35 pm
by Phil23
Going back thru my ini files in the backups.....
16/08/2020 - 6:00am.
Code: Select all
[Graphs]
ChartMaxDays=60
GraphHours=168
MoonImageEnabled=1
MoonImageSize=100
MoonImageFtpDest=images/moon.png
TempVisible=1
InTempVisible=1
HIVisible=1
DPVisible=1
WCVisible=1
AppTempVisible=1
FeelsLikeVisible=1
HumidexVisible=1
InHumVisible=1
OutHumVisible=1
Current Ini file:-
Code: Select all
[Graphs]
ChartMaxDays=60
GraphHours=168
MoonImageEnabled=1
MoonImageSize=100
MoonImageFtpDest=images/moon.png
TempVisible=0
InTempVisible=0
HIVisible=0
DPVisible=0
WCVisible=0
AppTempVisible=0
FeelsLikeVisible=0
HumidexVisible=0
InHumVisible=0
OutHumVisible=0
Don't think these values can be edited in the interface, so am assuming the change was written by the calibration routine.
Edited them manually & all is now back to normal.
Re: Missing Charts.
Posted: Sun 16 Aug 2020 11:45 am
by mcrossley
Phil23 wrote: ↑Sat 15 Aug 2020 10:02 pm
I do notice a couple of multipliers of 0.000 which would seem invalid.
The zero values are M2 values - second order multipliers, they should be zero for nil effect.
Phil23 wrote: ↑Sat 15 Aug 2020 10:35 pm
Going back thru my ini files in the backups.....
Don't think these values can be edited in the interface, so am assuming the change was written by the calibration routine.
Edited them manually & all is now back to normal.
They can bet set via the interface - Station Settings |Graphs
The default is for them to all be enabled.
Re: Missing Charts.
Posted: Sun 16 Aug 2020 8:00 pm
by Phil23
mcrossley wrote: ↑Sun 16 Aug 2020 11:45 am
They can bet set via the interface - Station Settings |Graphs
The default is for them to all be enabled.
I don't see anything other than Graph Hours & Days in that section.
I tried clearing caches in case an old script was cached.
Also checked most of the related files & all related to station settings seem to be current.
Will try & reproduce the charts visibility issue later from a backup.
Thanks
Phil.
Re: Missing Charts.
Posted: Sun 16 Aug 2020 8:20 pm
by mcrossley
Phil23 wrote: ↑Sun 16 Aug 2020 8:00 pm
I don't see anything other than Graph Hours & Days in that section.
I tried clearing caches in case an old script was cached.
Then it sounds like you haven't updated all the /interface files for b3090? Specifically in this case the /interface/json/StationXXXX files.
Re: Missing Charts.
Posted: Wed 19 Aug 2020 10:06 pm
by Phil23
mcrossley wrote: ↑Sun 16 Aug 2020 8:20 pm
Specifically in this case the /interface/json/StationXXXX files.
Thanks Mark,
100% correct.
Both the Station*.json files were stuck back in March.
Re: Missing Charts.
Posted: Thu 20 Aug 2020 9:04 am
by mcrossley
Which is probably why the values got set to zero as the settings editor would not be returning the values.