Cumulus Support

If your question relates do an ongoing problem with using MX, then please follow these instructions, don't just post "Help me":

1) In admin interface Settings tab, station settings, Options section, select debug logging. This adds a lot of extra information to the log designed to help answer questions when someone has a problem.
2) If your problem relates to uploading to your remote web server, then in admin interface, settings tab, internet settings screen, Web/FTP settings section, about 2/3 way down, select FTP logging
3) Leave MX running for a while, hopefully long enough for several instances of your problem to reoccur
4) Stop MX
5) zip the latest file updated in CumulusMX/MXDiags folder. Add into zip, any log files that seem relevant to your question, and any other files you have modified from their content in the MX distribution if those files are relevant to your problem.
6) At this point you can optionally try restarting MX
7) Now ask your question in the correct sub-forum Cumulus MX Current (releases since b3043)
8) Use the attachment tab below the posting window to upload your zip. In the post explain your problem, and quote any settings (do not disclose passwords) that might be relevant. Also state what device you are running MX on, and on what device you view the admin interface.
9) If your problem relates to uploading, some information on your web server structure can help.
10) If your problem relates to the admin interface say so.
11 ) If your problem relates to web pages on your own web server (not server generated for the admin interface) say so, and which web pages you are using, and (if relevant) PHP version being used.
12 ) Given the right information, as listed above, permits other people to answer your question easily.

So I changed the Weather Station type in Settings to OS WMR100 (is that the right one for WMR88?)...but since then, the Monthly File JUN20 didn't update.

ironeagleuk wrote: ↑Sun 07 Jun 2020 11:47 am I then remembered I had an Oregon Scientific WMR88 so wanted to use that instead (I wanted to keep existing Cumulus1 working with FineOffset til all setup). So I changed the Weather Station type in Settings to OS WMR100 (is that the right one for WMR88?)...but since then, the Monthly File JUN20 didn't update.

sfws wrote: ↑Sun 07 Jun 2020 12:35 pm The best way to ask for help, in a way that makes it easier for others to help you, is to follow these instructions, you have followed some, but not all:


That quote is taken from https://cumuluswiki.org/a/Cumulus_MX#Wh ... _a_problem

beteljuice wrote: ↑Mon 08 Jun 2020 2:31 am Well Richard ...

According to your ftp log .. The ONLY files you are uploading are realtime.txt and realtimegauges.txt - where are the rest ?

2020-06-07 19:25:08.595 Normal running
2020-06-07 19:25:08.596 Sending reset
2020-06-07 19:25:08.604 Start loop
2020-06-07 19:25:40.741 Error encountered during Realtime MySQL operation.
2020-06-07 19:25:40.741 Can't connect to MySQL server on '127.0.0.1' (10061):
No connection could be made because the target machine actively refused it 127.0.0.1:3306
2020-06-07 19:26:00.136 Minimum data set of pressure, temperature, and wind is not available and NoSensorCheck is not enabled. Skip processing

PaulMy wrote: ↑Mon 08 Jun 2020 3:11 pm The MXdiags shows:

2020-06-07 19:25:08.595 Normal running
2020-06-07 19:25:08.596 Sending reset
2020-06-07 19:25:08.604 Start loop
2020-06-07 19:25:40.741 Error encountered during Realtime MySQL operation.
2020-06-07 19:25:40.741 Can't connect to MySQL server on '127.0.0.1' (10061):
No connection could be made because the target machine actively refused it 127.0.0.1:3306
2020-06-07 19:26:00.136 Minimum data set of pressure, temperature, and wind is not available and NoSensorCheck is not enabled. Skip processing

From that at minimum the sensors need to be fixed or NoSensorCheck=1 set in Cumulus.ini

Enjoy,
Paul

beteljuice wrote: ↑Tue 09 Jun 2020 12:39 am You are running your own M$ server ?

I think this may be your problem

ironeagleuk wrote: ↑Mon 08 Jun 2020 11:57 pm Things seem to be working.....except the Trends page on my website

I had a search of the forum, and it's very similar to this, but I can't resolve it at the moment: viewtopic.php?f=40&t=17986&hilit=trends

Following the info on that link I saw that graphconfig.json was showing a 404 file not found, and I have the same problem.

The file is on my website in the root as can be seen by the attached image

I am using Chrome, but have also tried Edge and IE and get the same result

Here's a link to the page: http://www.ironeagleuk.co.uk/cumulus2/trends.htm

[FTP site]
AutoUpdate=1
IncludeSTD=1
IncludeSTDImages=1

[FTP site]
AutoUpdate=1
IncludeSTD=1
IncludeGraphDataFiles=1

sfws wrote: ↑Tue 09 Jun 2020 10:11 am

Ok, one of the Cumulus.ini differences between Cumulus 1 and MX that I had forgotten about when updating the MX FAQ recently is:

Cumulus 1:

Code: Select all

[FTP site]
AutoUpdate=1
IncludeSTD=1
IncludeSTDImages=1

Cumulus MX:

Code: Select all

[FTP site]
AutoUpdate=1
IncludeSTD=1
IncludeGraphDataFiles=1

In other words, there is a different parameter for Trends. Check you have IncludeGraphDataFiles=1

In the admin interface, this is ticking Include graph data files reached by Settings tab, Internet settings, web/FTP settings section