I have downloaded MX Ver. 3.5.3. build 3074.
It will not run, Comes up "Station Type not set", (in a command box)
What am I missing ?
Been running Weather Station = Forever Speed WS1080
Using Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014
No problems but would like to try MX
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Windows 7 Install
Moderator: mcrossley
-
colinjackson768
- Posts: 1
- Joined: Tue 21 Apr 2020 3:38 pm
- Weather Station: Forever Speed WS1080
- Operating System: Windows 7
-
water01
- Posts: 3670
- Joined: Sat 13 Aug 2011 9:33 am
- Weather Station: Ecowitt HP2551
- Operating System: Windows 10/11 64bit Synology NAS
- Location: Burnham-on-Sea
- Contact:
Re: Windows 7 Install
If you have not copied your Cumulus.ini file and data across from your Cumulus 1 installation Cumululus MX will not know your station type.
So you have two paths open to you,
1. Copy your data files and Cumululus.ini file across to the CumulusMX installation (check it is Cumulus.ini with a capital C, rename if not).
2. Start CumulusMX and the fire up your browser and type in http://localhost:8998/ or an IP address if it on another host on your network, and the when the Interface appears in your browser go to Settings / Station Settings and select Fine Offset in Station type as you first did with Cumulus 1.
So you have two paths open to you,
1. Copy your data files and Cumululus.ini file across to the CumulusMX installation (check it is Cumulus.ini with a capital C, rename if not).
2. Start CumulusMX and the fire up your browser and type in http://localhost:8998/ or an IP address if it on another host on your network, and the when the Interface appears in your browser go to Settings / Station Settings and select Fine Offset in Station type as you first did with Cumulus 1.
David
