Hello, I have installed the latest version of Cumulus MX on a RP2. This is connected to a Vantage Pro 2 console with a data logger. When I run the software I receive the above message and also the following;
System.IO.IOException: Bad file descriptor
at System.IO.Ports.SerialPortStream.ThrowIOException () [0x00000] in <filename unknown>:0
at System.IO.Ports.SerialPortStream.Dispose (Boolean disposing) [0x00000] in <filename unknown>:0
at System.IO.Ports.SerialPortStream.Finalize () [0x00000] in <filename unknown>:0 System.IO.IOException: Bad file descriptor
at System.IO.Ports.SerialPortStream.ThrowIOException () [0x00000] in <filename unknown>:0
at System.IO.Ports.SerialPortStream.Dispose (Boolean disposing) [0x00000] in <filename unknown>:0
at System.IO.Ports.SerialPortStream.Finalize () [0x00000] in <filename unknown>:0
Could anyone please advise me?
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Rasberrypi - 'unable to connect to station'
Moderator: mcrossley
-
mcrossley
- Posts: 14384
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Rasberrypi - 'unable to connect to station'
You'll have to give us a bit more to go on.
Is it USB or Serial attached?
What have you configured for the com port in Cumulus?
If it is USB attached station, have you switched it to serial port mode?
Does the station show correctly in the /dev folder?
Is it USB or Serial attached?
What have you configured for the com port in Cumulus?
If it is USB attached station, have you switched it to serial port mode?
Does the station show correctly in the /dev folder?
Re: Rasberrypi - 'unable to connect to station'
It is now fixed, I forgot to change the small c to a capital when I transfered the .ini file so it was not looking at my data com3. Thanks for your help.