24 hour -12 hour

[opticsman0127]

If I set the station graph display period to 12 hours, all is well. Web shows text as 12 hours and, both web and station graph periods show 12 hours. However, if I set the station to 24 hours, the station period goes to 24 hours, web text follows but, the web graphs show only a 12 hour period.

Regards

Barry

PS Getting more impressed by the hour with this software Steve, you must have dedicated hundreds of hours to get it this good.

[steve]

If I set the station graph display period to 12 hours, all is well. Web shows text as 12 hours and, both web and station graph periods show 12 hours. However, if I set the station to 24 hours, the station period goes to 24 hours, web text follows but, the web graphs show only a 12 hour period.

Once you've switched to 12 hours and back to 24 hours, it will only start building back up to 24 hours again, it doesn't re-read the data from the log. I did this deliberately so as not to lose any of the recent 'finer grained' plots that you might have built up while Cumulus was running - the plot interval is 1-minute while running, but it only has whatever log interval you've set otherwise. You can force it to immediately redisplay a full 24 hours by restarting, but again, you will lose the finer grained plot.

PS Getting more impressed by the hour with this software Steve, you must have dedicated hundreds of hours to get it this good.

Thousands!

[opticsman0127]

I can believe thousands and, thanks for the explanation on the 12/24 hour situation.

Barry