Page 2 of 2
Re: Davis Vantage Pro 2 + Raspberry PI3 + CumulusMX
Posted: Thu 09 Feb 2017 2:46 pm
by rmpjunior
Yes, I've already did this two steps. So, I attached the diags.
Re: Davis Vantage Pro 2 + Raspberry PI3 + CumulusMX
Posted: Thu 09 Feb 2017 6:07 pm
by steve
It's asking for archive data but not getting a response. Do you have the Cumulus logger interval and the station interval the same?
Re: Davis Vantage Pro 2 + Raspberry PI3 + CumulusMX
Posted: Thu 09 Feb 2017 6:19 pm
by rmpjunior
I think that they are equal, but can you say to me where I can found the settings for each one?
Thanks in advance.
EDIT:
I have a desktop with windows and a serial port. Install CumulusMX, configure everything and it's working perfectly. When I connected on the same PC the serial/usb adapter, change the COM port to COM10(as on the device manager), the MXDiags looks like this:
Code: Select all
2017-02-09 17:41:56.051 Starting web socket server on port 8002
2017-02-09 17:42:00.232 Unable to wake VP
2017-02-09 17:42:00.232 Sending DMPAFT
So I start to think that the problem is the adapter. Someone have a link with a good adapter?
Re: Davis Vantage Pro 2 + Raspberry PI3 + CumulusMX
Posted: Wed 15 Feb 2017 5:20 pm
by rmpjunior
It's working!
I gave up of the usb/serial adapters and bought a TTL to DB9 adapter. After enabled the UART at /boot/config.ini, I can access my station through the /dev/ttyAMA0 port.
Thanks for the software and thanks for the answers!