Cumulus Support

Hello,
My SS has been working fine for quite some time but yesterday it stopped to update the file gauge-data.txt. All the pop-up graphs are generated correctly.
Yesterday the dewpoint was below 0 ºC. I changed the file gauge-data.txt.tmpl by the last version. The file gauge-data.txt continues with the problem (not update).
After reading messages, I thought it would be a problem due to the value of dewpoint. But today, the dewpoint is above 0 ºC (2,2 ºC) and the file gauge-data.txt is not updated.

Can someone help me?
Enclosed you can find my gauge-data.txt.tmpl.
Thank you and best regards.

======================
Using Weewx 3.1 in Fine Offset on Raspi.
http://meteovelez.ddns.net/ss

The values for weewx are passed into that script at run-time. You need to look at the generated data file. If there is nothing obviously wrong in that file (you can post it here for me to take a look as well if you like), then you will have to ask on the weewx forum for help.

Hello Mark,
Many thanks for your response.
I am not sure when you say "to look at the generated data file" if you are refering to the file "gauge-data.txt".
The last "gauge-data.txt" is as follow:
{
"timeUTC":"2017,01,14,19,43,01",
"date":"2017.01.14 20:43",
"dateFormat":"y.m.d h:m",
"SensorContactLost":"0",
"tempunit":"°C",
"windunit":" kph",
"pressunit":" hPa",
"rainunit":" mm",
"windrununit":"kilometer",
"cloudbaseunit":" ft",
"temp":"11.7",
"tempTL":"10.8",
"tempTH":"15.8",
"TtempTL":"19:58",
"TtempTH":"15:38",
"temptrend":"0.5",
"intemp":"19.7",
"hum":"51.0",
"humTL":"38.0",
"humTH":"73.0",
"ThumTL":"10:49",
"ThumTH":"20:03",
"inhum":"53.0",
"dew":"1.89841691788",
"dewpointTL":"-0.631000811109",
"dewpointTH":"7.20201845726",
"TdewpointTL":"10:49",
"TdewpointTH":"12:58",
"wchill":"11.7",
"wchillTL":"10.8",
"TwchillTL":"19:58",
"heatindex":"11.7",
"heatindexTH":"15.8",
"TheatindexTH":"15:38",
"apptemp":"7.84007816858",
"apptempTL":"0",
"apptempTH":"0",
"TapptempTL":"",
"TapptempTH":"",
"humidex":"11.7000252197",
"press":"1027.18799069",
"pressL":"1015.62458584",
"pressH":"1031.49687765",
"pressTL":"1022.83875958",
"pressTH":"1027.4072933",
"TpressTL":"04:18",
"TpressTH":"20:31",
"presstrendval":"1.56726005574",
"rfall":"0.0",
"rrate":"0.0",
"rrateTM":"0.0",
"TrrateTM":"00:03",
"hourlyrainTH":"0.0",
"ThourlyrainTH":"20:03",
"LastRainTipISO":"2000-01-01 00:00",
"wlatest":"11.1599999957",
"wspeed":"4.95999999811",
"windTM":"21.9599999916",
"wgust":"15.8399999939",
"wgustTM":"15.8399999939",
"TwgustTM":"14:28",
"bearing":"22.5",
"avgbearing":"210.672064079",
"bearingTM":"315.0",
"BearingRangeFrom10":"000",
"BearingRangeTo10":"000",
"domwinddir":"SSW",
"WindRoseData":[],
"windrun":"115.869999956",
"Tbeaufort":"F3",
"UV":" N/A",
"UVTH":"",
"SolarRad":"",
"SolarTM":"",
"CurrentSolarMax":"N/A",
"cloudbasevalue":"4180.34220839",
"forecast":"Estacion MeteoVelez conectada",
"version":"3.1.0",
"build":"",
"ver":"12"
}

Please, say me if you detect some wrong.
Many thanks in advance.

The files look OK, its just out of date - 2017,01,14 - was that file from your web server or the weewx server?

If teh web server, you need to check the local copy on your weewx server, if that is OK then you need to check the weewx upload of the file. I don't know how that works, I suggest you ask for help on the weewx forum.

Hello Mark,
Many thanks for your help.
I am going to ask on the Weewx forum.

Best regrads,