MX catchup.

[Phil23]

Have had a quick search but finding only results for external services.
Just noticed my MX data has a time period missing after I shut my weather laptop down to clean it's CPU fan.

Graph data shows points up to 7:00am, then nothing again till 7:28am.

Not sure if this is the period it was turned off of the result of the System freezes I was experiencing which were CPU Temp related.

At any rate I was expecting Cumulus to catch up.

Any thoughts?

Thanks

Phil

[steve]

If you zip up the MX diags folder and attach it, I'll take a look. What interval do you have your Davis logger set to?

[Phil23]

I've got 10 minutes set as the interval in Cumulus, is it also configurable in the Pro2?

Diags attached.

Note that 4:00 am is when I have scheduled the laptop restart, & use a script to close cumulus.

Thanks for the reply.

Cheers

Phil.

[steve]

You have your station's logger set to 30 minutes, so there were no entries available after 0700 at 0728, then next one would have been 0730.

If you want to change the interval (and you should have the station interval set to the same interval as Cumulus), you'll need to use some other software such as Weatherlink, as Cumulus does not currently allow setting of the interval.

[Phil23]

Thanks Steve,

Station setting now changed.

[Phil23]

Other strange anomaly I see is when browsing the charts with the cursor to view data points.

Generally data points are at 10 minute intervals, but today, 23rd, they are at 10 minute intervals up until 13:40, then from there onward data points are every 4 minutes, from 13:43 onwards.

Phil

[steve]

As mentioned in the FAQ, Cumulus plots data for the graphs at 1-minute intervals while it's running, and initialises the graphs at start-up from the data in the data logs. If I zoom your temperature graph to 6 hours I can see that there is a data point every minute. If some views don't show that, it will be down to the way Highcharts operates rather than anything to do with Cumulus.