Page 1 of 1
CumulusMX not listening potr 8998 - RaspberryPi
Posted: Tue 24 May 2016 10:32 am
by maryl16
Hello.
I was forced to re-install the system on my Raspberry Pi.
Everything installed, mono version 3.2.8. However, the script cumulusmx.sh will not run properly. Everything is progressing well. However, not listening on port 8998. Before the script shows the following messages:
Code: Select all
curl: /usr/lib/arm-linux-gnueabihf/libldap_r-2.4.so.2: unsupported version 2 of Verdef record
grep: /tmp/version.txt: No such file or directory
What could be the problem?
Re: CumulusMX not listening potr 8998 - RaspberryPi
Posted: Tue 24 May 2016 10:43 am
by steve
I don't recognise any of this as being anything to do with Cumulus, so presumably it's something to do with Jan's script - I don't really know. What happens if you run Cumulus 'normally', i.e. without the script?
Re: CumulusMX not listening potr 8998 - RaspberryPi
Posted: Tue 24 May 2016 2:07 pm
by maryl16
How do I start the Cumulus MX "normally".
Re: CumulusMX not listening potr 8998 - RaspberryPi
Posted: Tue 24 May 2016 2:38 pm
by Hobbyist
Change to the directory where you have installed CumulusMX.
Type "Sudo mono CumulusMX.exe" ( without speech marks
then "enter"
CumulusMX should run.
Re: CumulusMX not listening potr 8998 - RaspberryPi
Posted: Tue 24 May 2016 6:40 pm
by maryl16
Probably a problem with mono.
The following message appears.
Code: Select all
root@raspberrypi:/home/pi/CumulusMX# mono CumulusMX.exe
The assembly mscorlib.dll was not found or could not be loaded.
It should have been installed in the `/usr/local/lib/mono/4.5/mscorlib.dll' directory.
It's strange, because the script runs the Cumulus MX, but does not open the port.
I have Mono installed.
Code: Select all
root@raspberrypi:/home/pi# mono -V
Mono JIT compiler version 3.2.8 (tarball Mon 23 May 07:01:20 GMT+1 2016)
Copyright (C) 2002-2014 Novell, Inc, Xamarin Inc and Contributors. www.mono-project.com
TLS: __thread
SIGSEGV: normal
Notifications: epoll
Architecture: armel,vfp+hard
Disabled: none
Misc: softdebug
LLVM: supported, not enabled.
GC: sgen
Re: CumulusMX not listening potr 8998 - RaspberryPi
Posted: Tue 24 May 2016 6:47 pm
by steve
Have you installed the mono-complete package, as in the instructions?
Re: CumulusMX not listening potr 8998 - RaspberryPi
Posted: Tue 24 May 2016 8:02 pm
by maryl16
I installed mono-complete.
The problem disappeared for the first restart of the device.
Now, there is a problem as in the beginning.
Re: CumulusMX not listening potr 8998 - RaspberryPi
Posted: Tue 24 May 2016 8:18 pm
by rogerthn
What about
Code: Select all
sudo netstat -taupeen | grep mono | grep LISTEN
Do you see two lines and what are the port numbers?
Re: CumulusMX not listening potr 8998 - RaspberryPi
Posted: Tue 24 May 2016 8:25 pm
by maryl16
I know the command netstat.
Your will have no effect.
Re: CumulusMX not listening potr 8998 - RaspberryPi
Posted: Wed 25 May 2016 5:37 am
by rogerthn
maryl16 wrote:I know the command netstat.
Your will have no effect.
and what ports are used?
Re: CumulusMX not listening potr 8998 - RaspberryPi
Posted: Wed 25 May 2016 11:02 am
by maryl16
rogerthn wrote:and what ports are used?
It is used only port 22 for ssh.
The problem was solved, helped two more restarts the device.
Now, every time you start the device, CumulusMX starts without a problem.
Thank you all for your help.
