Cumulus Support

Hi Just set up an Oregon Scientific WMR200 Station running on Pi2. I have followed the instructions on how to set up and connect to WOW web site. I have connected to this site but it keeps stating AJAX error in all the graphs. Have I missed something on the "Web settings" that would give this error ie, "Use FTP rename or Enable realtime FTP etc? I initially connected via computer running windows 10 before transferring to Pi2, installed the station type and ticked the required boxes under settings, Long/Lat settings, chose units, inserted site name/password, all other "Program settings" were left at default and the data was uploaded ok from this. When connected to Pi2 the same settings were inserted but keeps throwing Ajax error? Any help would be appreciated. Thanks

I think we will need a link to page to work out what is wrong.

Hi. I have been informed that MONO 4.xxx will not run Cumulus, could this be the problem?

Problem solved - Was using NOOBS V 1.8 to run Raspbian/Debian on Pi2, spent hrs & hrs & hrs unable to connect to station. Updated to NOOBS v1.9 and ran debian - connected 1st time to station and to internet at WOW site.