Cumulus Support

Hi,

I am having some difficulty configuring the steelseries gauges to display realtime info.
Can you have a look and point me in the right direction.

http://houndspool.com/weather/gauges.htm

I'm using Cumulus as a weather station.

Thanks in advance!

Your realtimegauges.txt file - http://houndspool.com/weather/realtimegauges.txt - is 'unprocessed', i.e. it's the same as the realtimegaugesT.txt template, but it needs to be processed by Cumulus so that it contains actual data. Perhaps you haven't selected 'process'?

smfmetro wrote:
I'm using Cumulus as a weather station.

Do you actually have a weather station? Cumulus is not a weather station, Cumulus is weather software that reads data from your own weather station.

Hi,
Thanks for the replies.

I'm sending a screenshot of my configuration. | believe I have the process checkbutton checked.

And the weather station is actually a Fine Offset.

Thanks for the help!

You appear to have the remote path incorrect, your file is turning up here - http://houndspool.com/realtimegauges.txt - rather than here - http://houndspool.com/weather/realtimegauges.txt - as you haven't told Cumulus to put it in the 'weather' directory.

AH! Thanks!

That appeared to get the gauges page working but now the index page is not updating?
Houndspool.com/weather

If you believe your configuration is correct for the standard files, you need to turn on ftp logging and look at ftplog.txt for error messages or other clues.

I had a look at your web site and the pages seem to be updating now, so you presumably found the problem?

Yes! Problem solved - thank you so much! It was actually working... Just updating every 15 min