Page 1 of 1
USB Connection of WS3080 -> Station not found
Posted: Wed 02 Dec 2015 6:05 pm
by sverose
Hello,
hope somebody can help me.
I tried to use my WS3080 with UV-Sensor in CumulusMX 3034 at my raspberry pi 2 B.
I set "/dev/bus/usb/001/005" for ComportName in Cumulus.ini and Type=7.
But Cumulus allways says, "Fine Offset station not found".
With lsusb i get:
...
Bus 001 Device 005: ID 1941:8021 Dream Link WH1080 Weather Station / USB Missile Launcher
...
Thanks.
Sven
Re: USB Connection of WS3080 -> Station not found
Posted: Wed 02 Dec 2015 6:11 pm
by steve
Do you have libudev0 installed? What version of Mono are you using? Are you running as root (with sudo)?
(You don't need to set a com port name for a Fine Offset station, it's not a serial device)
Re: USB Connection of WS3080 -> Station not found
Posted: Fri 04 Dec 2015 11:08 am
by sverose
I have installed the following versions:
libudev0: 175-7.2
mono: 3.2.8+dfsg-10
(( Depends: mono-runtime (= 3.2.8+dfsg-10), mono-runtime-sgen (= 3.2.8+dfsg-10), libmono-2.0-1 (= 3.2.8+dfsg-10), libmono-profiler (= 3.2.8+dfsg-10), mono-utils (= 3.2.8+dfsg-10), mono-jay (= 3.2.8+dfsg-10), mono-devel (= 3.2.8+dfsg-10), mono-mcs (= 3.2.8+dfsg-10), mono-csharp-shell (= 3.2.8+dfsg-10), mono-2.0-gac (= 3.2.8+dfsg-10), mono-4.0-gac (= 3.2.8+dfsg-10), mono-2.0-service (= 3.2.8+dfsg-10), mono-4.0-service (= 3.2.8+dfsg-10), monodoc-base (= 3.2.8+dfsg-10), monodoc-manual (= 3.2.8+dfsg-10), libmono-cil-dev (= 3.2.8+dfsg-10) ))
Yes, I started cumulus with sudo.
Any idea?
Re: USB Connection of WS3080 -> Station not found
Posted: Fri 04 Dec 2015 11:29 am
by steve
You seem to be running the same setup that most people have, so I don't know why it doesn't work for you. If you zip up the MXdiags folder and attach it here, I'll see if I can see anything.
Re: USB Connection of WS3080 -> Station not found
Posted: Sat 05 Dec 2015 4:34 pm
by sverose
Hi Steve,
ok, you can see the attached logfile.
Thanks.
Sven
PS. By the way, I tried CumulusMX on my Windows 7 Pro notebook and the station was found without any problems.
Re: USB Connection of WS3080 -> Station not found
Posted: Sat 05 Dec 2015 5:03 pm
by steve
The diags file doesn't help, unfortunately.
It could be that the USB HID component thinks that your system doesn't have the necessary requirements (as the station is clearly being recognised by the system). What is the output from 'uname -s' and 'uname -r'?
Re: USB Connection of WS3080 -> Station not found
Posted: Sun 06 Dec 2015 5:06 pm
by sverose
The outputs are:
for "uname -s": Linux
and for "uname -r": 4.1.13-v7+
Thanks.
Sven
Re: USB Connection of WS3080 -> Station not found
Posted: Sun 06 Dec 2015 5:39 pm
by steve
Those look OK. You do have 'meta' package mono-complete installed, yes?
Re: USB Connection of WS3080 -> Station not found
Posted: Mon 07 Dec 2015 4:53 pm
by sverose
Yes, I have installed mono with "mono-completet". Now I updated mono to Version "4.2.1.102-0xamarin1", but no change. Station not found.
Re: USB Connection of WS3080 -> Station not found
Posted: Mon 07 Dec 2015 4:58 pm
by steve
Mono 4.2 definitely won't work, this is already known. I don't know why it won't work for you (with Mono 3.2.8) if you have followed the instructions correctly - sorry.
Re: USB Connection of WS3080 -> Station not found
Posted: Wed 09 Dec 2015 6:56 am
by sverose
On the weekend, i will format the sd-card and try a complete new setup, and hope it will work after this.
Thanks.
Sven