Ubuntu Server 15.10

[g7vnn]

I have recently been running CumulusMX successfully on the Raspberry PI2 - worked perfectly However I have decided to install and run it off my Ubuntu Server, and now I can't get CMX to work!! I have an Oregon Scientific WMR100 station connected via USB to the server, and when I try an run the software after inputting the com port number I get the error listed below. I'm no expert on using Linux, and each attempt at trying to locate and enter what I think the port should be results in the error. I have also attached the MXDiags folder as requested by the software.

Any help or pointers would be much appreciated

Thanks
Chris.



Current culture: English (United Kingdom)
Serial: 093F966B4D14B19ADF2835E4775E3AEE
Cumulus MX v.3.0.0 build 3032
This is pre-release beta software
Today.ini = data/today.ini
Last update=2015-11-07T13:36:30
WMR100 station not found!
Cumulus running at: http://*:8998/
(Replace * with any IP address on this machine, or localhost)
Starting web socket server on port 8002
07/11/2015 13:36:30
Type Ctrl-C to terminate
System.NullReferenceException: Object reference not set to an instance of an object
at . () [0x00000] in <filename unknown>:0
at . () [0x00000] in <filename unknown>:0
at System.Threading.Thread.StartInternal () [0x00000] in <filename unknown>:0
**** An error has occurred - please zip up the MXdiags folder and post it in the forum ****
Press Enter to terminate

[steve]

You don't need to enter a COM port for a WMR100 - it's a USB station, not serial.

This is the problem:

WMR100 station not found!

So the system isn't making the station visible to Cumulus. Do you have libudev0 installed?

[g7vnn]

Hi Steve

Thanks for the info..... must of missed that bit of info

Installed libudev0 and It's all up and running and working as it should

Thanks again for the help
Chris.