Page 1 of 2
File Name Unknown - Error Message
Posted: Sun 13 Sep 2015 7:37 pm
by King Kong
Hello
Again I apologize if I'm posting this to the wrong forum.
Error message = "File Name Unknown"
Oregon Scientific WRM 100
BeagleBone Black
Debian
See attached files from MXdiags
Thanks
Re: File Name Unknown - Error Message
Posted: Sun 13 Sep 2015 8:32 pm
by BigOkie
King Kong wrote:Hello
Again I apologize if I'm posting this to the wrong forum.
Error message = "File Name Unknown"
Oregon Scientific WRM 100
BeagleBone Black
Debian
See attached files from MXdiags
Thanks
It almost looks like you're running more than one instance of Cumulus (in this case I'm guessing you would be running more than one instance of mono). You might look to see.
Re: File Name Unknown - Error Message
Posted: Thu 17 Sep 2015 1:41 am
by King Kong
Hello
Thanks for the help. I'm relatively new to Linux and so had to find out how to display individual processes. Please see attached file. I hope I've got the correct information.
Note: after originally posting the attached screen shot, I found out that I could scroll the screen. Rookie mistake. However I didn't see a "mono" process. Next I did a "pgrep mono" which is suppose to list the process ID of all currently running processes. No information was returned therefore I'm concluding that "mono" isn't running. Is this assumption correct or is there another Debian command that I should be using to verify if the "mono' process is running?
Thanks
Re: File Name Unknown - Error Message
Posted: Thu 17 Sep 2015 5:12 am
by BigOkie
King Kong wrote:Hello
Thanks for the help. I'm relatively new to Linux and so had to find out how to display individual processes. Please see attached file. I hope I've got the correct information.
Note: after originally posting the attached screen shot, I found out that I could scroll the screen. Rookie mistake. However I didn't see a "mono" process. Next I did a "pgrep mono" which is suppose to list the process ID of all currently running processes. No information was returned therefore I'm concluding that "mono" isn't running. Is this assumption correct or is there another Debian command that I should be using to verify if the "mono' process is running?
Thanks
Try issuing this command instead and post the results:
ps -ax | grep mono
Re: File Name Unknown - Error Message
Posted: Thu 17 Sep 2015 10:59 pm
by King Kong
Hello
I tried the command:
ps -ax | grep mono
and the "kill" command. I don't think I stopped the mono process nor am I sure that it was running in the first place. Please see attached screen shot.
Thanks for the help and do you have any other suggestions?
Re: File Name Unknown - Error Message
Posted: Fri 18 Sep 2015 6:19 am
by BigOkie
King Kong wrote:Hello
I tried the command:
ps -ax | grep mono
and the "kill" command. I don't think I stopped the mono process nor am I sure that it was running in the first place. Please see attached screen shot.
Thanks for the help and do you have any other suggestions?
It wasn't. Do you have mono installed?
Type in 'which mono' and give the response.
I mean , I assume you are since you're giving me log files.
Re: File Name Unknown - Error Message
Posted: Fri 18 Sep 2015 3:02 pm
by freddie
King Kong wrote:Hello
I tried the command:
ps -ax | grep mono
Your syntax is incorrect - it should be:
i.e no "-" needed before the "ax".
King Kong wrote:and the "kill" command. I don't think I stopped the mono process nor am I sure that it was running in the first place.
The process you were attempting to kill was your search for "mono" which would've terminated by the time you got round to typing the kill command. To remove the search processes from the results returned by grep, use the following:
This will specifically exclude anything with the word "grep" from the results returned by the command.
Re: File Name Unknown - Error Message
Posted: Fri 18 Sep 2015 9:45 pm
by King Kong
Hello
It looks like I have mono installed. Please see screen shot.
Thanks
Re: File Name Unknown - Error Message
Posted: Sat 19 Sep 2015 6:15 am
by rogerthn
King Kong wrote:Hello
It looks like I have mono installed...
To see what version
Re: File Name Unknown - Error Message
Posted: Sat 19 Sep 2015 1:24 pm
by King Kong
Hello
The Mono version is 3.8.0. Should I be updating to a newer version?
Re: File Name Unknown - Error Message
Posted: Sat 19 Sep 2015 2:14 pm
by steve
It's not able to find your station. What is the output from the command lsusb? Do you have packages mono-complete and libudev0 installed? Cumulus needs libudev.so.0, as mentioned in the instructions.
Re: File Name Unknown - Error Message
Posted: Sun 20 Sep 2015 2:30 pm
by King Kong
Hello Steve
Thanks for the help. I can confirm the "mono" is installed (but not "mono-complete"). Also "libudev0:armhf is installed. Please see attached files.
Thanks for the "lsusb" command. This helped me clue into something; my weather station wasn't plugged into the BeagleBone. In my defense the instructions don't mention anything about connecting the weather station to the device and then configuring it. Maybe it would be a good idea to add that in the configuration notes. Just a suggestion. I had my weather station running on a Windows machine and wanted to configure the BeagleBone "off line" before moving the hardware over to it. Once the weather station was had, CumulusMX started and I was able to configure it.
The original issue seems to be resolved unless you advise me of a difference between "mono" and 'mono-complete" and I need to replace one with the other.
My new issue is the web pages seem to hang. No information is being displayed on the dashboard and I've stopped reporting to Wunderground. The auxiliary display (the piece of equipment that came from Oregon Scientific) is displaying the temperature and wind speed so I know the outdoor sensors are being red.
You you like me to post this in a new post?
Re: File Name Unknown - Error Message
Posted: Sun 20 Sep 2015 3:26 pm
by steve
King Kong wrote:My new issue is the web pages seem to hang. No information is being displayed on the dashboard
What browser are you using? Are any errors displayed in the F12 developer console in the browser?
and I've stopped reporting to Wunderground.
Are you using rapid fire? If so, turn that off and see if it starts updating. Turn on debug logging and after a WU update should have taken place, zip up the MX diags folder and attach it to a reply in this thread.
Re: File Name Unknown - Error Message
Posted: Tue 22 Sep 2015 1:06 am
by King Kong
steve wrote:King Kong wrote:My new issue is the web pages seem to hang. No information is being displayed on the dashboard
What browser are you using? Are any errors displayed in the F12 developer console in the browser?
I'm using IE, Chrome + FireFox. All with the same results.
F12 =
Using //@ to indicate sourceMappingURL pragmas is deprecated. Use //# instead jquery-latest.min.js:1:0
Use of getPreventDefault() is deprecated. Use defaultPrevented instead.
I hope that's what your looking for. From the main html page I pressed "F12" and did a copy of the information.
and I've stopped reporting to Wunderground.
Are you using rapid fire? If so, turn that off and see if it starts updating.
Not using "Rapid Fire"
Turn on debug logging and after a WU update should have taken place, zip up the MX diags folder and attach it to a reply in this thread.
Stopped CululusMX
Added "Logging=1" to the "Station" section on the "Cumulus.ini" file.
Started CumulusMX
Re: File Name Unknown - Error Message
Posted: Tue 22 Sep 2015 7:42 am
by steve
There may be an issue with the port used for the web socket data (8002), and something isn't allowing communication on that port. If you view a page that doesn't use web sockets, e.g. the today/yesterday page, do you see any data?
The WU problem is this:
WU Response: OK: INVALIDPASSWORDID|Password and/or id are incorrect