Mono On Beagle Bone Black

[sperry russ]

Since I had trouble with my weather station and CumulusMx on my Raspberry Pi2 ( https://cumulus.hosiene.co.uk/viewtopic.php?f=27&t=14014 ) I bought a Raspberry Pi A+ to see if it would work since it only has one USB port. I used a USB hub with it but had the same problem as with the Raspberry Pi2.

So now I have a Beagle Bone Black Rev C with 4GB EMMC. I spent a lot of time setting it up with a new image and tweaks. Then when I tried to install mono-complete it would not install. After some research I find that there is supposedly no package for it on Beagle Bone Black. So how did you get it to work on your Beagle Bone Black?

[steve]

If it's not straightforward, then I probably used Google to find out how to do it. Using Google just now, I found this: http://www.ofitselfso.com/Beagle/Instal ... eBlack.php

[sperry russ]

I did check google and found a lot of different and conflicting info about it. I thought you had it running on a beagle bone black Steve?

But later on after I made this post I found this: http://blogs.the-simmons.net/danny/post ... Black.aspx which led to this: http://www.mono-project.com/docs/gettin ... erivatives and it worked.

Today I will run CumulusMX on it and see if It works without the errors I got on the Raspbery Pi's.

Thanks for the info.

[steve]

I had it running on my BBB some time ago, but just for a short time as a test. I don't remember what I had to do to get it to work.