Cumulus Support

Running 3027 on Raspberry Pi. No problems.

Accessing the console from Windows10 and Edge get dark flickering shadow of a pointer on the wind speed gauge which comes and goes seemingly with every other real time update.

Using Edge to connect to the SS Gauges on web site gives the same.

Using Chrome on W10 and Android based Chrome browser OK for both console and web.

Suspect issue is related to Edge. Not a major worry but visually distracting

The gauges work fine in Edge for me, both in the UI and on the web site. It sounds like a graphics driver issue to me, but I don't know why that would only affect Edge.

Steve,

I'll check a few things but the shadow is just that I think - the actual shadow of the pointer, but it is displaced to the left and up from the centre of the dial and always points towards the top of the screen, flickering with the movement of the real pointer

Another thing - the shadow only appears when the real pointer is moving.
System is Windows 10 PRO 64 bit and the effect can be seen with Edge and IE 11 but NOT Chrome (Version 44.0.2403.130 m (64-bit)) .

The Display adapter is a bog standard Intel HD and driver version is 9.17.10.4229 27/5/15

Finger seems to point at something MS are doing rather than the driver as CHROME works fine with the same setup. As I say it's just a distraction when needles are moving.

Further update. Problem appears to be linked to display adapter and Edge/IE11. All working correctly with Acer Revo / nVidia adapter / and Windows 10 Pro.

Will keep an eye out on the HP / Intel websites to see if there is newer adapter s/w over the next week or so.

Just to close this down. Not a fix as such but I replaced the installed Intel Adapter driver (2011) with the generic MS Driver from Win10. Problem has gone away. Will have to wait for Intel to release driver. Win10 didn't like the x64 Intel driver for Win8 for some reason!