Cumulus Support

Just a curiosity question and I didn't know where to post the question.

@Steve

Do you have a guesstimate as to the number of users of your software?

I noticed that CumulusMX has a registration number or similar built in. I never really saw that in Cumulus 1 (well never really looked).

It's impossible to say how many users there are with any accuracy (many of them won't have their own web site for example), but my guess would be in the mid numbers of thousands. There are just under 9000 registered users on the forum, but not all of those will ever have been using Cumulus and many will no longer be using it, but on the other hand there will be users who aren't registered on the forum at all.

The Cumulus 1 installer gets downloaded between 100 and 200 times every day, and has been downloaded over 400,000 times in total. Make of that what you will. Maybe my guess is on the low side

Thank-you Steve.

A bit into bean counting (metrics) here.

pete_c wrote:Just a curiosity question and I didn't know where to post the question.

@Steve

Do you have a guesstimate as to the number of users of your software?

I noticed that CumulusMX has a registration number or similar built in. I never really saw that in Cumulus 1 (well never really looked).

edit

pete_c wrote:Just a curiosity question and I didn't know where to post the question.

@Steve

Do you have a guesstimate as to the number of users of your software?

I noticed that CumulusMX has a registration number or similar built in. I never really saw that in Cumulus 1 (well never really looked).

edit

Which links?

steve wrote:Which links?

Sorry its was the program malvare


arneande

@arneande

Yup Malwarebytes blocks my no-ip dynamic dns links above.

I see the same here using Malwarebytes.

It is just relating to no ip dot com and not the Cumulus web sites.

When am here cant reach Mx what am doing wrong
best from norwegian amatuer

Current culture: Norsk (bokmål) (Norge)
Serial: AA
Cumulus MX v.3.0.0 build 3026
This is pre-release beta software
Today.ini = data\today.ini
Last update=04.08.2015 16:40:00
Connected to station
17:24:09 Downloading Archive Data
Cumulus running at: http://*:8998/
(Replace * with any IP address on this machine, or localhost)
Starting web socket server on port 8002
04.08.2015 17:24:09
Type Ctrl-C to terminate
17:24:12 Downloading Archive Data
17:24:17 Normal running

vantage pro2


best from norwegian amatuer

You should see it locally on your browser.

Not sure if you care but you should maybe remove the serial number above from your post.

I am still utilizing V.25 and see that you are using V.26.

It should not matter though.

Here see the same when starting and Cumulus. I am using Firefox here and do have Malwarebytes on all of the Wintel computers and see it fine (except not using IE).

root@ICS-Cumulus:/CumulusMX# ./autostart_mx.sh
Current culture: English (United States)
Serial: XYZ
Cumulus MX v.3.0.0 build 3025
This is pre-release beta software
Today.ini = data/today.ini
Last update=8/4/2015 10:30:00 AM
Connected to station
10:36:58 AMDownloading Archive Data
10:36:59 AMDownloading Archive Data
Cumulus running at: http://*:8998/
(Replace * with any IP address on this machine, or localhost)
Starting web socket server on port 8002
8/4/2015 10:36:59 AM
Type Ctrl-C to terminate
10:36:59 AMNormal running

Updated to V.26 and see this...

System.NullReferenceException: Object reference not set to an instance of an object
at ?.? (Int32 ?) [0x00000] in <filename unknown>:0
at ?.? () [0x00000] in <filename unknown>:0
at System.Threading.Thread.StartInternal () [0x00000] in <filename unknown>:0
**** An error has occurred - please zip up the MXdiags folder and post it in the forum ****
Press Enter to terminate

pete_c wrote:You should see it locally on your browser.

Not sure if you care but you should maybe remove the serial number above from your post.

I am still utilizing V.25 and see that you are using V.26.

It should not matter though.

Here see the same when starting and Cumulus. I am using Firefox here and do have Malwarebytes on all of the Wintel computers and see it fine (except not using IE).

root@ICS-Cumulus:/CumulusMX# ./autostart_mx.sh
Current culture: English (United States)
Serial: XYZ
Cumulus MX v.3.0.0 build 3025
This is pre-release beta software
Today.ini = data/today.ini
Last update=8/4/2015 10:30:00 AM
Connected to station
10:36:58 AMDownloading Archive Data
10:36:59 AMDownloading Archive Data
Cumulus running at: http://*:8998/
(Replace * with any IP address on this machine, or localhost)
Starting web socket server on port 8002
8/4/2015 10:36:59 AM
Type Ctrl-C to terminate
10:36:59 AMNormal running

Updated to V.26 and see this...

System.NullReferenceException: Object reference not set to an instance of an object
at ?.? (Int32 ?) [0x00000] in <filename unknown>:0
at ?.? () [0x00000] in <filename unknown>:0
at System.Threading.Thread.StartInternal () [0x00000] in <filename unknown>:0
**** An error has occurred - please zip up the MXdiags folder and post it in the forum ****
Press Enter to terminate

Connected to station
18:05:27 Normal running
System.InvalidOperationException: Operasjonen er ikke tillatt for socketer som ikke er koblet til.
ved System.Net.Sockets.TcpClient.GetStream()
ved ?.?(TcpClient ?, String ?) i C:\Users\steve\Documents\Visual Studio 2015\Projects\CumulusMX\CumulusMX\DavisStation.cs:linje 644
ved ?.?() i C:\Users\steve\Documents\Visual Studio 2015\Projects\CumulusMX\CumulusMX\DavisStation.cs:linje 549
ved System.Threading.ThreadHelper.ThreadStart_Context(Object state)
ved System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
ved System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
ved System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
ved System.Threading.ThreadHelper.ThreadStart()
**** An error has occurred - please zip up the MXdiags folder and post it in the forum ****
Press Enter to terminate

Type Ctrl-C to terminate
okey try 25?

thanks

arneande

@arneande

I have not tried CumulusMX on a Wintel box yet.

It would be better for you to start a new post relating to your issue and V.26.

Here downgraded back to V.25 on my RPi2 for the time being.