Page 1 of 1

Errors in Cumulus v1.9.4(1099)

Posted: Thu 28 May 2015 11:50 am
by Dennisdg
Steve

I notice today Cumulus reported the following error on my System Info page.

28/05/2015 00:31:00 Error closing data file: C:CumulusdataMay15log.txt. I/O error 10328/05/2015 00:31:00 Error closing data file: C:\Cumulus\data\May15log.txt. I/O error 103
Error Time: 00:31 28/05/2015

I can't see anything wrong on my web pages, has the error been corrected, should I be concerned?

While looking at a diagnostic file for today I see that there have been various bardata errors, e.g. 28/05/2015 05:56:03.630 : Error in bardata, length = 0

Again I can't see anything obvious.

Attached are May15log.txt and cumulus.009 both zipped.

If you get a moment please take a look and advise.

Thanks

Re: Errors in Cumulus v1.9.4(1099)

Posted: Thu 28 May 2015 12:14 pm
by steve
This is described in the FAQ, which lists a number of possible causes - http://wiki.sandaysoft.com/a/FAQ#I_am_g ... _error_103

The entry for 00:31 was unable to be written, but it continued writing entries after that.

The 'bardata' error is not related, it just means that the DLL was unable to read some data from the console - it happens from time.

Re: Errors in Cumulus v1.9.4(1099)

Posted: Thu 28 May 2015 12:48 pm
by Dennisdg
Thanks for the link.