Page 4 of 4
Re: Cumulus MX and Meteobridge
Posted: Tue 29 Dec 2015 10:51 pm
by steve
It doesn't seem to getting much back that it can make sense of. You could try creating an entry for DavisIPResponseTime in the [Station] section of Cumulus.ini before starting Cumulus. The value is in milliseconds and the default is 1000, i.e. one second. Try increasing it to see if that helps.
Re: Cumulus MX and Meteobridge
Posted: Wed 30 Dec 2015 2:11 am
by Swigman
Hi Steve,
it took forever to populate the web page but it did in the end. It all seems to be running normally now. I have included the latest diag along with my ini file in case its of any use. I set the cfg setting as per DavisIPResponseTime=5000
Ta
Re: Cumulus MX and Meteobridge
Posted: Wed 30 Dec 2015 3:38 am
by steve
The logger sent the entire contents of its memory, which took some time to process (and discard), particularly with the 5 seconds delay between commands. You might find you can reduce it a little.
Re: Cumulus MX and Meteobridge
Posted: Wed 30 Dec 2015 4:29 am
by Swigman
Thanks Mate,
Have now transferred MX to my RP2 and setup an auto start and its all working really well. Thanks again for the great support!
Ta