Cumulus MX and Meteobridge

Post by **steve** » Tue 29 Dec 2015 10:51 pm

It doesn't seem to getting much back that it can make sense of. You could try creating an entry for DavisIPResponseTime in the [Station] section of Cumulus.ini before starting Cumulus. The value is in milliseconds and the default is 1000, i.e. one second. Try increasing it to see if that helps.

Swigman · Post by **Swigman** » Wed 30 Dec 2015 2:11 am

Hi Steve,
it took forever to populate the web page but it did in the end. It all seems to be running normally now. I have included the latest diag along with my ini file in case its of any use. I set the cfg setting as per DavisIPResponseTime=5000

Ta

Post by **steve** » Wed 30 Dec 2015 3:38 am

The logger sent the entire contents of its memory, which took some time to process (and discard), particularly with the 5 seconds delay between commands. You might find you can reduce it a little.

Swigman · Post by **Swigman** » Wed 30 Dec 2015 4:29 am

Thanks Mate,
Have now transferred MX to my RP2 and setup an auto start and its all working really well. Thanks again for the great support!
Ta

Cumulus Support

Cumulus MX and Meteobridge

Re: Cumulus MX and Meteobridge

Re: Cumulus MX and Meteobridge

Re: Cumulus MX and Meteobridge

Re: Cumulus MX and Meteobridge