Welcome to the Cumulus Support forum.

Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080

n25fr Weather Station Maplin

Discussion specific to Fine Offset and similar rebadged weather stations
Post Reply
Mighty_Man82
Posts: 2
Joined: Tue 13 Jan 2015 7:12 pm
Weather Station: http://www.maplin.co.uk/p/wirele
Operating System: Windows 7 64 bit
Location: Stoke On Trent

n25fr Weather Station Maplin

Post by Mighty_Man82 »

Hi Guy's I Have Just Purchased This Item http://www.maplin.co.uk/p/wireless-weat ... tion-n25fr and i can get the outside tempture to work on it but the wind speed and wind reading won't work and seems it's not picking up the senssor for this like on the base unit

can somebody point in the right direction to sorting out this problem?
AllyCat
Posts: 1132
Joined: Sat 26 Feb 2011 1:58 pm
Weather Station: Fine Offset 1080/1 & 3080
Operating System: Windows XP SP3
Location: SE London

Re: n25fr Weather Station Maplin

Post by AllyCat »

Hi,

Welcome to the forum. What about the external humidity and rain measurements?

All of the external data are sent by the same radio transmission, so if only some are being "lost" then faulty connections are suggested. The little "RJ11" plug/sockets for the rain and wind sometimes do not connect properly.

For testing, you can swap over the rain and wind plugs. Then turning the anemometer should indicate lots of rain, but the rain gauge will need a lot of rocking to indicate any wind. Note that the data only updates once every 48 seconds (when the red LED on the transmitter flashes).

If none of the external data is being reported, then what distance (and obstructions) do you have between the transmitter and receiver?

Cheers, Alan.

PS: Note that the station you have linked does not have a wind direction vane and does not connect to a computer, so it cannot use Cumulus.
Mighty_Man82
Posts: 2
Joined: Tue 13 Jan 2015 7:12 pm
Weather Station: http://www.maplin.co.uk/p/wirele
Operating System: Windows 7 64 bit
Location: Stoke On Trent

Re: n25fr Weather Station Maplin

Post by Mighty_Man82 »

humidity is picking up fine and temperature outside but no rain measurements or wind
AllyCat
Posts: 1132
Joined: Sat 26 Feb 2011 1:58 pm
Weather Station: Fine Offset 1080/1 & 3080
Operating System: Windows XP SP3
Location: SE London

Re: n25fr Weather Station Maplin

Post by AllyCat »

Hi,

Unlikely, but are you sure that you're not receiving signals from somebody else's station?

The Wind and Rain sensors each contain only a magnetic reed switch, wired to the two middle contacts of their respective plugs. If you have a multimeter or similar, it should be fairly easy to check what is faulty.

At least Maplin are usually good in handling warranty issues. But it might be worth considering exchanging it for one of the computer-interfaced models (with a wind vane) the next time that they're "On Offer" (c £50). Or an arguably better model (with Radio Controlled Clock, etc.) is currently available from Clas Ohlson at a similar price. However, the "touchscreen" models do have a less clear LCD on their Console.

Cheers, Alan.
Post Reply