I am assuming that the known issue on the known issue log is to do with the Rainfall and Rain Rate gauges as the others work OK in build 3003.
What I am seeing is if you refresh the gauges page (F5) the right calibration appears around the rings of both dials then when the data arrives a second or so later the calibration all goes to zero in both dials.
Also as I use Inches to measure rain both the dials only show 1 decimal place (Ok in millimetres) but not precise enough for inches when 0.05 of an inch is 1.3 millimetres.
Hope that helps.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Gauges in Cumulus MX Interface
Moderator: mcrossley
-
steve
- Cumulus Author
- Posts: 26672
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Gauges in Cumulus MX Interface
I think most of the gauge scales are screwy if you use non-metric units. I need to add code to change the scales according to the units.
Steve