Page 1 of 1
Vantage Vue not recieving outdoor temp
Posted: Sun 30 Nov 2014 10:29 pm
by dtreid
My new to me Vantage Vue seems to work well except for the outdoor temp and dew point. Both of these show dashes where the temp should be.
I have replaced the battery in the ISS to no avail.
Any suggestions?
Re: Vantage Vue not recieving outdoor temp
Posted: Mon 01 Dec 2014 12:59 am
by PaulMy
Possibly a sensor failure? Had it been working ok before you got it? Do you upload to Weather Underground or a website, if so can you give a link so we can look at it?
Paul
Re: Vantage Vue not recieving outdoor temp
Posted: Mon 01 Dec 2014 2:24 am
by dtreid
It was working good before I got it. I don't have the ability to connect my davis to the net so I can't explore that avenue.
Re: Vantage Vue not recieving outdoor temp
Posted: Mon 01 Dec 2014 4:09 am
by PaulMy
Sorry, I am not much help with hardware issues especially with the View as I don't have that station. Presumably you have checked if perhaps a sensor got a loose connection. Do you have a datalogger or just the ISS and console?
Paul
Re: Vantage Vue not recieving outdoor temp
Posted: Mon 01 Dec 2014 5:21 am
by dtreid
I just have the ISS and console
Re: Vantage Vue not recieving outdoor temp
Posted: Mon 01 Dec 2014 6:30 pm
by PaulMy
You could check the Davis Vue manual to see if there is any mention on checking the external sensors. The manual should be available from the Davis site. And you could also contact/call Davis support.
Paul