Welcome to the Cumulus Support forum.

Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080

Migrating from WMR200 to VP2 - Daft Question YTD Rainfall

Discussion specific to Davis weather stations
Post Reply
darren
Posts: 13
Joined: Wed 06 Nov 2013 11:24 pm
Weather Station: Davis Vantage Pro 2
Operating System: Windows 10
Location: Stockton on Tees UK
Contact:

Migrating from WMR200 to VP2 - Daft Question YTD Rainfall

Post by darren »

Hi all,

I've just bought a Davis VP2 to replace an Oregon WMR200 and am hoping to get it installed this weekend.

I have paired the console to the Weatherlink software using the serial connection rather than USB, so fingers crossed Cumulus should be ok.

Before I start to connect the station to Cumulus, what do I do about YTD Rain on the console?

Do I input the YTD rainfall into the VP2, will this double what Cumulus shows or does Cumulus read the YTD figure from the connected console? Or can I not bother with this and Cumulus will carry on recording YTD rain?

Thanks
Darren
User avatar
steve
Cumulus Author
Posts: 26672
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Migrating from WMR200 to VP2 - Daft Question YTD Rainfal

Post by steve »

If you're using the same data that you used with the old station, e.g. the same installation with the station type changed, then Cumulus will just carry on from where it was before. You might find that 'today's rainfall' goes a bit awry (and hence values derived from that) because the rain counter will suddenly change, but Cumulus copes with most unexpected changes in the rain counter. The rain in last hour and last 24 hours will likely go wrong, but there's nothing that can be done about that and they will eventually correct themselves.
Steve
darren
Posts: 13
Joined: Wed 06 Nov 2013 11:24 pm
Weather Station: Davis Vantage Pro 2
Operating System: Windows 10
Location: Stockton on Tees UK
Contact:

Re: Migrating from WMR200 to VP2 - Daft Question YTD Rainfal

Post by darren »

Hi Steve,

Thanks for the quick reply!

Was testing the rain gauge tonight and this message appeared...
You do not have the required permissions to view the files attached to this post.
User avatar
PaulMy
Posts: 4355
Joined: Sun 28 Sep 2008 11:54 pm
Weather Station: Davis VP2 Plus 24-Hour FARS
Operating System: Windows8 and Windows10
Location: Komoka, ON Canada
Contact:

Re: Migrating from WMR200 to VP2 - Daft Question YTD Rainfal

Post by PaulMy »

That message is kind of neat the first time you see it on the console. And it got me thinking, does Cumulus upload and display that as the Davis forecast on the standard Cumulus web page if the Davis forecast is selected. I will have to remember to look next time it appears - but may be quite a while as seems it is white stuff that will be coming down instead.

Enjoy,
Paul
VP2+
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
Image
User avatar
steve
Cumulus Author
Posts: 26672
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Migrating from WMR200 to VP2 - Daft Question YTD Rainfal

Post by steve »

No, those amusing messages are separate from the forecasts, and aren't available via the logger connection. "Hold on to your hat" is the the one I get most often...
Steve
darren
Posts: 13
Joined: Wed 06 Nov 2013 11:24 pm
Weather Station: Davis Vantage Pro 2
Operating System: Windows 10
Location: Stockton on Tees UK
Contact:

Re: Migrating from WMR200 to VP2 - Daft Question YTD Rainfal

Post by darren »

i'll have to keep an eye on the messages.

Well is up and running. Connected fine to build 1098 and downloaded from the datalogger using 1099!

Steve you are a genius!
Post Reply