Page 1 of 1

Unable to Auto Update website

Posted: Sat 15 Nov 2014 7:21 pm
by Glendower
Hi All,

My Davis Vue has worked without problems for over 2 years.

I recently noticed that my website data is not being updated but all other sites (wunderground, WOW etc) are.

The files in the Web directory are also not being updated automatically.

If I use Web Update my website is updated with the current data as are the files in the Web directory.

Shortly afterwards I also noticed that the pressure as indicated on the console was not changing, it now reads '---------'

Are the two things related and what can I do to get the pressure operating correctly?

www.weathertorquay.com

Re: Unable to Auto Update website

Posted: Sat 15 Nov 2014 8:00 pm
by steve
Yes, the two are related, see http://wiki.sandaysoft.com/a/FAQ#Cumulu ... eb_uploads

I'm afraid I know nothing about the Vantage Vue, so I can't help with the pressure problem. Do I remember reading that the pressure sensor in a Vue is actually in the outdoor unit, rather than in the console as with a VP2?

Re: Unable to Auto Update website

Posted: Sat 15 Nov 2014 8:12 pm
by Glendower
Hi Steve,

Outstanding !

I now have my website updating automatically.

I wasn't aware that the pressure sensor was in the outdoor unit, I thought it was in the console.

Does anybody know where the pressure sensor is located and can it be replaced/repaired?

Many many thanks Steve

Re: Unable to Auto Update website

Posted: Sat 15 Nov 2014 9:48 pm
by steve
Glendower wrote:I wasn't aware that the pressure sensor was in the outdoor unit, I thought it was in the console.
It may well be in the console, I may be mistaken.