Welcome to the Cumulus Support forum.

Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080

Suggestions for replacement for Maplin N96GY (Fine Offset)

Discussion and questions about Cumulus weather station software version 1. This section is the main place to get help with Cumulus 1 software developed by Steve Loft that ceased development in November 2014.
Post Reply
skmorgan1944
Posts: 16
Joined: Wed 08 Jun 2011 9:05 am
Weather Station: Fine Offset WH1081
Operating System: WHS 2011
Location: Pembrokeshire, UK

Suggestions for replacement for Maplin N96GY (Fine Offset)

Post by skmorgan1944 »

As others have noted, the Maplin N96GY/Fine Offset loses contact with the sensors periodically. The only cure I have found is to remove batteries/reset and set up again. Of course you lose any stored data during this process. One of the Cumulus updates went a long way to reduce this problem but has not eliminated it. Mind you, for around £50 the Maplin is very good value.

However I am think of upgrading my station and would welcome suggestions. I know that some stations run into many hundreds if not thousands of pounds and these are outside my current resources.

Can anyone suggest a suitable upgrade that won't break the bank and is reliable?

Regards
Simon
water01
Posts: 3670
Joined: Sat 13 Aug 2011 9:33 am
Weather Station: Ecowitt HP2551
Operating System: Windows 10/11 64bit Synology NAS
Location: Burnham-on-Sea
Contact:

Re: Suggestions for replacement for Maplin N96GY (Fine Offse

Post by water01 »

David
Image
snapper
Posts: 19
Joined: Fri 04 Jul 2014 10:05 pm
Weather Station: Vantage Pro 2
Operating System: Centos Linux 6.5
Location: Northants

Re: Suggestions for replacement for Maplin N96GY (Fine Offse

Post by snapper »

You don't say what your budget is, but I would recommend a Davis vantage Vue.
Around 300 for the unit, plus about 60 (iirc) for a third party usb PC interface/logger.
Post Reply