Barometric signal loss!

[WX_Frank]

I got no barometer readings on my console from the ISS.
All other data in is fine.
Is the sensor broken, way to check this and if broken...do I need to replace whole ISS unit?

Davis Advantage Vue (wireless).

Thanks in advance.

[mcrossley]

The barometer is in the console not the ISS on the Vue just like the Pro2 afaik.

[WX_Frank]

The barometer is in the console not the ISS on the Vue just like the Pro2 afaik.

Really....if so, my mistake
Anyone experience the same problem and knows how to fix this?

[Jim Brown]

I would try reseting the console. Remove batteries and external power Wait a couple of minutes and reinstall batt and power.

[WX_Frank]

I would try reseting the console. Remove batteries and external power Wait a couple of minutes and reinstall batt and power.

Thank's Jim...just tried that without any luck.
I also tried to manually put in the BAR-values pressing and release 2ND, then press and hold SET....but the barometric pressure variable don't respond/blink

[WX_Frank]

Anyone please??
Need to fix this asap!!

[steve]

You probably need to speak to Davis.

[WX_Frank]

You probably need to speak to Davis.

Thank's Steve...will do that.

[WX_Frank]

Is there a way I can add a fixed barometric value in Cumulus?

[steve]

Not as live data, no; only by editing the files afterwards.

[WX_Frank]

Not as live data, no; only by editing the files afterwards.

Just thinking about adding a value like 1020mb (so can I manually change now & then) until I get this fixed, but where to do this, Steve?
Thanks.

[steve]

In here http://wiki.sandaysoft.com/a/Monthly_log_files

[WX_Frank]

In here http://wiki.sandaysoft.com/a/Monthly_log_files

Thank's Steve...fixed my logs, but can I "override" with a fixed value on my weather front page?
As you can see it shows 0.0hpa (?)

http://www.torrevieja-weather.net/

Thank's a lot.

[steve]

Thank's Steve...fixed my logs, but can I "override" with a fixed value on my weather front page?

Presumably you could edit something to replace the value as supplied by Cumulus with a fixed value, but I don't know how you would do that with those particular templates - you would need to ask Ken.

[WX_Frank]

Ken...are you around to solve this??