NOw getting error message each time I load cumulus

[Mal]

Hi Can you assist . After several years of now problems I logged onto cumulus and got error message and could not load. discovered that all my set up data had gone although overall data seems to be still there. Now logging on and data transfer taking place but error light shows and when I click I get the below message (see attached jpg can anyone help please many thanks Malcolm

[steve]

You need to do what it says - edit the files at the specified lines to correct the problem. See the FAQ: http://wiki.sandaysoft.com/a/FAQ#Error_ ... line....22

[Mal]

Hi Steve thanks very much indeed. Seemed to have got a lot of blank lines appear. Deleted spaces and saved both files and now seems to be fine, at least error gone. Notice some of readings though are now odd e.g min temp today at 1532 0 thanks again Malcolmhttps://cumulus.hosiene.co.uk/posting.php?mode=reply&f=4&t=12405#

[steve]

If you zip up the diags folder and attach it, I may be able to see what's been going on.

[Mal]

Steve thanks folder attached (I hope) Malcolm

[steve]

It got a set of garbage data from the station at about 15:32 yesterday. Some of it gets ignored automatically, but you can use the 'spike removal' settings on the calibration screen to get it to ignore large (false) changes in the data readings.

[Mal]

Steve thanks very much. All seems to be correct at moment and having looked at Spike screen and its help I am afraid it is beyond my knowledge. Too detailed for me to mess about with so I think I will carry on as overall getting what seem to be correct results. I will live with occasional odd ones. Again many thanks for your time and support. regards Malcolm