I am running 1.9.4 build 1095 - I turned on debug logging after realizing no data was being sent to weatherbug yet no data appears in this log regarding weatherbug. It shows that the Wundergound data is being successfully updated but there is no reference to weatherbug, good or bad.
This used to work just fine however I honestly don't know when it was last successful as I use Cumulus to feed weatherbug which in turn feeds my Isy99 irrigation system. As such I haven't checked it since last fall when I turned off my irrigation, but now I just planted up my garden and found my irrigation system isn't working because no data is getting from Cumulus to weatherbug.
I contacted weatherbug first, they confirmed my backyard station is active and working but they are not receiving any data from Cumulus. I verified all my account info and password with them, all is good. The computer running cumulus has the firewall turned off for testing, it has internet access and published fine to Wunderground it just isn't connecting to weatherbug and from what the log shows it isn't attempting to connect to weatherbug.
Does anyone have any ideas? I need this working ASAP to get my irrigation system up and running.
Thank you in advance for any help.
Mark
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
No Weatherbug Data
-
steve
- Cumulus Author
- Posts: 26672
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: No Weatherbug Data
Are you using 'rapid fire' for WU? If so, does it still work if you turn off rapid fire? What intervals do you have set for WU and WeatherBug?
Are all of your sensors working correctly and giving sensible readings? In particular pressure and outside temperature?
If you zip up the diags folder and the debug log and attach them, I'll take a look.
Are all of your sensors working correctly and giving sensible readings? In particular pressure and outside temperature?
If you zip up the diags folder and the debug log and attach them, I'll take a look.
Steve
-
markarmer
- Posts: 3
- Joined: Fri 06 Jan 2012 5:39 am
- Weather Station: 928
- Operating System: Windows 7
- Location: California
Re: No Weatherbug Data
Steve, that was it - You solved it already 
I don't use my indoor sensor and hadn't replaced the batteries since I purchased my weather station years ago. As such, Cumulus was not receiving a pressure reading.
I replaced the batteries in my indoor unit and within a few minutes pressure readings were showing up and Cumulus is once again posting to WeatherBug.
Thank You
Mark
I don't use my indoor sensor and hadn't replaced the batteries since I purchased my weather station years ago. As such, Cumulus was not receiving a pressure reading.
I replaced the batteries in my indoor unit and within a few minutes pressure readings were showing up and Cumulus is once again posting to WeatherBug.
Thank You
Mark