I am currently running 1.9.4 build 1095.
On the 12th May 2015 I had a recorded maximum wind gust of 15.8 km/h. This is recorded on the "view" "selectagraph" correctly as 15.8.
However, it also registers in "averages and extremes" as a record wind gust of 158!!
This has never happened before
Ideas and thanks
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
data not transferring correctly
-
steve
- Cumulus Author
- Posts: 26672
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: data not transferring correctly
http://wiki.sandaysoft.com/a/FAQ#I_get_ ... h_readings
It's a common problem with Fine Offset stations. Cumulus has 'spike removal' settings on the calibration screen so that you can get it to attempt to filter out one-off bad readings like this.
It's a common problem with Fine Offset stations. Cumulus has 'spike removal' settings on the calibration screen so that you can get it to attempt to filter out one-off bad readings like this.
Steve