Page 1 of 1

Data transfer

Posted: Mon 28 Apr 2014 3:20 am
by Larsen13
My data transfer is stuck on 2000-00-00 00:00. It has been stuck here for abour three weeks. Any suggestions? My weather station is an Oregon Scientific WMR 200A.

Re: Data transfer

Posted: Mon 28 Apr 2014 7:00 am
by steve
There is (or has been) a problem with the clock on your station. Try (re)setting the clock - you may need to reset the station first or clear the memory.

Re: Data transfer

Posted: Mon 05 May 2014 1:50 am
by Larsen13
steve wrote:There is (or has been) a problem with the clock on your station. Try (re)setting the clock - you may need to reset the station first or clear the memory.
Steve, thanks for the tip. The clock and calendar are just fine on the station.
Thank you for the tip,
Tom

Re: Data transfer

Posted: Mon 05 May 2014 6:38 am
by steve
Larsen13 wrote:The clock and calendar are just fine on the station.
Then at some point in the past, they were not. I'm assuming you're seeing this date and time on the box that Cumulus pops up when it's downloading data? Those timestamps are the timestamps taken directly from the entries which the station downloads to Cumulus when Cumulus asks for the archive data. Eventually it should work its way through all of those entries with the faulty date and start sending valid data. If it doesn't then as I said you will need to try resetting the station, or resetting the clock (even if it is currently apparently correct).