Hi
I have just been given an Environmental Measurements Ltd WSD1 wind sensor and an ARG 100 Rain gauge and was interested to know the best way to interface these to the Cumulus program to form a weather station.
Thanks for any help you can give me.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Advice Required
-
steve
- Cumulus Author
- Posts: 26672
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Advice Required
You would either have to
1. Interface them to a console of a type supported by Cumulus, or
2. Emulate a console supported by Cumulus, or
3. Generate a file in easyweather.dat format - http://wiki.sandaysoft.com/a/EasyWeathe ... st_record:
1. Interface them to a console of a type supported by Cumulus, or
2. Emulate a console supported by Cumulus, or
3. Generate a file in easyweather.dat format - http://wiki.sandaysoft.com/a/EasyWeathe ... st_record:
Steve